Multi-objective optimization of an EDM process for Monel K-500 alloy using response surface methodology-multi-objective dragonfly algorithm
Open Access
- 5 September 2024
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-12
Abstract
Monel K-500 is a high-performance superalloy composed of nickel and copper, renowned for its exceptional strength, hardness, and resistance to corrosion. To machine this material more precisely and accurately, Electrical Discharge Machining (EDM) is one of the best choices. In EDM, material removal rate (MRR) and electrode wear rate (EWR) are crucial performance parameters that are often conflicting in nature. These parameters depend on several input variables, including peak current (Ip), pulse on time (Ton), duty cycle (Tau), and servo voltage (SV). Optimizing the EDM process is essential for enhancing performance. In this research, a set of experiments were conducted using EDM on Monel K500 alloy to determine the optimal process parameters. The Box–Behnken design was used to prepare the experimental design matrix. Utilizing the experimental data, a second-order mathematical model was developed using Response Surface Methodology (RSM). R2 value is found to be 99.40% and 96.60% for MRR and EWR RSM-based prediction model, respectively. High value of R2 is indicated is indicated good adequacy for prediction. The mathematical model further used in multi-objective dragonfly algorithm (MODA): a new meta-heuristic optimization technique to solve multi-objective optimization problem of EDM. The MODA is a very useful technique to achieve optimal solutions from the multi decision criteria. Utilizing this technique, a set of non-dominated solutions was obtained. Further, the TOPSIS method was used to determine the most desirable optimal solution, which was found to be 0.0135 mm3/min for EWR and 6.968 mm3/min for MRR. These results were obtained when the optimal process parameters were selected as Ip = 6 A, Ton = 200 µs, Tau = 12, and SV = 41.6 V. Operators can machine Monel K500 by selecting the above-mentioned optimal parameters to achieve the best performance.Keywords
This publication has 36 references indexed in Scilit:
- Multi-objective optimization of wire electrical discharge machining process using multi-attribute decision making techniques and regression analysisScientific Reports, 2024
- Surface roughness prediction of AISI D2 tool steel during powder mixed EDM using supervised machine learningScientific Reports, 2024
- Machine learning for multi-dimensional performance optimization and predictive modelling of nanopowder-mixed electric discharge machining (EDM)The International Journal of Advanced Manufacturing Technology, 2024
- Exploring wide-parametric range for tool electrode selection based on surface characterization and machining rate employing powder-mixed electric discharge machining process for Ti6Al4V ELIThe International Journal of Advanced Manufacturing Technology, 2023
- Multi-Objective Optimization of the Process Parameters in Electric Discharge Machining of 316L Porous Stainless Steel Using Metaheuristic TechniquesMaterials, 2022
- Modelling and Analysis of the Effect of EDM-Drilling Parameters on the Machining Performance of Inconel 718 Using the RSM and ANNs MethodsMaterials, 2022
- A new optimization algorithm to solve multi-objective problemsScientific Reports, 2021
- Comparison of NSGA-II, MOALO and MODA for Multi-Objective Optimization of Micro-Machining ProcessesMaterials, 2021
- The potentiality of sinking EDM for micro-impressions on Ti-6Al-4V: keeping the geometrical errors (axial and radial) and other machining measures (tool erosion and work roughness) at minimumScientific Reports, 2019
- Development and application of Cu-SWCNT nanocomposite–coated 6061Al electrode for EDMThe International Journal of Advanced Manufacturing Technology, 2019