Effects of Mn Segregations on Intergranular Fracture in a Medium‐Mn Low‐Density Steel
Authors:
- 29 May 2022
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 94 (2)
Abstract
Al‐bearing medium‐Mn low‐density steels possess great potential in the automotive industry because of their excellent mechanical properties based on transformation‐induced plasticity and low specific weight. Reducing the austenite stability against deformation‐induced martensitic transformation enables a high strain‐hardening capacity to be obtained; however, undesirably low stability often results in considerably reduced tensile ductility and brittle fracture. Herein, the brittle fracture that occurs with increasing annealing temperature for a Fe−0.3C–9Mn−5Al (wt%) steel is investigated in relation to Mn segregation at the phase boundaries between ferrite and austenite. The results demonstrate that annealing at 850 and 900 °C leads to ductile fractures with 72% and 95% tensile elongation, respectively, whereas only 25% elongation is achieved for the specimen annealed at 950 °C, exhibiting predominant intergranular facets. 3D atom probe tomography reveals that annealing at 950 °C promotes considerable Mn segregation at the ferrite/austenite phase boundaries with a peak composition of ≈19 at%, which is sufficient to reduce the boundary cohesion for intergranular fracture. Thermodynamic moving boundary simulation reveals that intercritical annealing is not a prerequisite for segregations; however, low‐temperature and prolonged holding should be accompanied, such as the coiling procedures.Keywords
Funding Information
- Korea Institute for Advancement of Technology (P0002019)
- Korea Institute of Materials Science (PNK8730)
This publication has 44 references indexed in Scilit:
- Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical propertiesScience and Technology of Advanced Materials, 2013
- Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulationActa Materialia, 2011
- High-strength Fe–20Mn–Al–C-based Alloys with Low DensityISIJ International, 2010
- Multiphase diffusion simulations in 1D using the DICTRA homogenization modelCalphad, 2009
- Thermo-Calc & DICTRA, computational tools for materials scienceCalphad, 2002
- Influence of alloying additions on grain boundary cohesion of transition metals: First-principles determination and its phenomenological extensionPhysical Review B, 2001
- A study of grain boundary embrittlement in an Fe–8%Mn alloyMaterials Science and Engineering: A, 2000
- The embrittlement and de-embrittlement of grain boundaries in an Fe-Mn-Ni alloy due to grain boundary segregation of MnMetallurgical and Materials Transactions A, 1996
- The role of chemical bonding in grain boundary embrittlementActa Metallurgica, 1982
- Interface adsorption, embrittlement and fracture in metallurgySurface Science, 1975