A Note on the Surface Deterioration of Scrimber Composites Exposed to Artificial Ageing
Open Access
Abstract
The effect of ultraviolet radiation on the surface deterioration of scrimber composites with different densities and levels of resin content was investigated for this paper. The surface color, gloss, roughness, and wettability of the samples were investigated to determine the extent of surface changes due to accelerated ageing. The results indicated that all scrimber composites exhibited variation in the color of their surfaces during artificial xenon light exposure. After artificial accelerated ageing, the surface contact angle and roughness were found to increase, whereas the surface gloss and surface free energy decreased. Furthermore, it was observed that the density and resin content of the scrimber composites contributed to reductions in their color variation, wettability, and roughness during weathering, which suggested that the density and resin content played important roles in determining their surface photodegradation properties. Artificial ageing resulted in the degradation of lignin and hemicellulose, thus causing severe surface characteristics.Keywords
Funding Information
- the Promotion of Project of Forestry Science and Technology of the Chinese Forestry and Grassland Administration (2019-36)
This publication has 18 references indexed in Scilit:
- Preparation and Characterization of Outdoor Bamboo-Fiber-Reinforced Composites with Different DensitiesBioResources, 2017
- Effect of density on the hygroscopicity and surface characteristics of hybrid poplar compregJournal of Wood Science, 2016
- Wood degradation under UV irradiation: A lignin characterizationJournal of Photochemistry and Photobiology B: Biology, 2016
- Evaluation of UV-permeability and photo-oxidisability of organic ultraviolet radiation-absorbing coatingsApplied Surface Science, 2015
- Structural analysis of heat-treated birch (Betule papyrifera) surface during artificial weatheringApplied Surface Science, 2013
- Photostabilization of wood using low molecular weight phenol formaldehyde resin and hindered amine light stabilizerPolymer Degradation and Stability, 2013
- Lignins as agents for bio-protection of woodHolzforschung, 2011
- Wettability and surface composition of partly and fully regenerated cellulose thin films from trimethylsilyl celluloseJournal of Colloid and Interface Science, 2011
- Surface deterioration of moso bamboo (Phyllostachys pubescens) induced by exposure to artificial sunlightJournal of Wood Science, 2009
- The effects of within-species and between-species variation in wood density on the photodegradation depth profiles of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa)Journal of Wood Science, 2005