The Output Voltage Control Strategy for DSEG With Controlled Rectification Based on Conduction Angle Estimation
- 14 June 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 67 (5) , 3350-3360
Abstract
Owing to the merits of smaller voltage ripples, lower armature current and cost compared to full-control (FC), the angular position semi-control (APSC) scheme is proposed in this paper for low speed range of the doubly salient electro-magnetic generator (DSEG) operating over wide speed range, which improve the output voltage without increasing the field current. In APSC, the energy is stored with positive current in the inductance rising area and negative current in the inductance falling area, by which the output power and voltage increase, and the excitation current reduces. Moreover, in order to improve the poor dynamic performance resulting from the large storage capacitor required for APSC, an ideal output voltage model is established according to the ampere-second balance of the energy storage capacitor on the load side firstly. Secondly, several correction methods are investigated to enhance the accuracy of the ideal model. Finally, based on the conduction angle estimation model, a novel output voltage control strategy is put forward. The feasibility and superior dynamic performance of the proposed strategy are validated by the experiment results.Keywords
Funding Information
- National Natural Science Foundation of China (51737006)
- National Natural Science Foundation of China (51477075)
This publication has 21 references indexed in Scilit:
- Comparative Study of Switched Reluctance Machines With Half-and Full-Teeth-Wound WindingsIEEE Transactions on Industrial Electronics, 2015
- Analysis and Verification of the Doubly Salient Brushless DC Generator for Automobile Auxiliary Power Unit ApplicationIEEE Transactions on Industrial Electronics, 2014
- Design and Analysis of a New Multitoothed Magnetless Doubly Salient MachineIEEE Transactions on Applied Superconductivity, 2013
- Switched Reluctance Generator Control for Optimal Power Generation With Current RegulationIEEE Transactions on Industry Applications, 2013
- Switched Reluctance Generator Controls for Optimal Power Generation and Battery ChargingIEEE Transactions on Industry Applications, 2012
- A Fault-Tolerant Parallel Structure of Single-Phase Full-Bridge Rectifiers for a Wound-Field Doubly Salient GeneratorIEEE Transactions on Industrial Electronics, 2012
- A New Topology of Low Speed Doubly Salient Brushless DC Generator for Wind Power GenerationIEEE Transactions on Magnetics, 2011
- A Doubly Salient Starter/Generator With Two-Section Twisted-Rotor Structure for Potential Future Aerospace ApplicationIEEE Transactions on Industrial Electronics, 2011
- On the Design of Power Circuit and Control Scheme for Switched Reluctance GeneratorIEEE Transactions on Power Electronics, 2008
- Optimal efficiency control of switched reluctance generatorsIEEE Transactions on Power Electronics, 2006