Rainfall Infiltration through Stratified Colluvial Deposits: Analytical Approach vs. Numerical Modelling
Open Access
- 15 February 2024
- journal article
- research article
- Published by MDPI AG in Geosciences
- Vol. 14 (2) , 53
Abstract
This work investigates the rainfall infiltration process within homogeneous and stratified colluvial deposits caused by short (1–3 h) and intense (40–90 mm/h) rainfall, using both analytical and numerical infiltration modelling. The findings of the investigation demonstrate that the classic Green–Ampt model can be employed effectively to study homogeneous colluvial covers with permeability equal to or lower than kw = 10−5 m/s and that are subject to a 1 h rainfall with intensity I ≥ 45–50 mm/h. In these circumstances, a top-down saturation front forms within the colluvial deposit, leading to the saturation of a 70–100 cm-thick layer. This critical condition occurs every 5–10 years in the mountain area of the Friuli Venezia Giulia Region (NE Italy), which corresponds to a lower return period of critical hydrologic events when compared with other mountain basins in the Alps due to the higher initial degree of saturation characterising colluvial covers in this area (70–95%). When analysing stratified colluvial covers, the Dagan–Bresler approximate model, as well as the numerical modelling, emphasised the strong influence that abrupt variations in the permeability of the various soil layers have on the infiltration process at depth. In particular, the presence of a top organic soil horizon that is rich in macro-pores and is characterised by a higher permeability (k = 10−4 m/s) actually reduces the possibility of surficial ponding, which is the basic condition of the “piston” models. The highly permeable top soil allows for a rapid downward infiltration up to contact with the underlying colluvial material, which is less permeable (k = 10−5 m/s). Therefore, a perched water table forms starting from the organic soil–colluvium interface, originating pore–water overpressures within the colluvial deposit, with maximum values in the order of 5–10 kPa.Keywords
Funding Information
- project PON 2014–2021 entitled “Hydrogeological instability, infrastructures and resilience: approaches and methodologies to experience a safer territory” (Prot. n. 782/2022)
This publication has 76 references indexed in Scilit:
- Viscoplastic modelling of rainfall-driven slow-moving landslides: application to California Coast RangesLandslides, 2023
- Occurrence of shallow landslides triggered by increased hydraulic conductivity due to tree rootsLandslides, 2022
- Importance of the unsaturated zone in landslide reactivation on flysch slopes: observations from Valići Landslide, CroatiaLandslides, 2021
- Preliminary analysis on the impacts of the rhizosphere on occurrence of rainfall-induced shallow landslidesLandslides, 2019
- Effect of rainfall on the triggering of the devastating slope failure at Malin, IndiaNatural Hazards, 2018
- Soil characterization for shallow landslides modeling: a case study in the Northern Apennines (Central Italy)Landslides, 2017
- Colluvial Deposit2014
- Infiltration into soils: Conceptual approaches and solutionsWater Resources Research, 2013
- Green-Ampt Infiltration Models for Varied Field Conditions: A RevisitWater Resources Management, 2011
- Field variability of landslide model parametersEnvironmental Geology, 1998