Seismic Performance of Precast Prestressed Concrete Bridge Girders Using Field-Cast Ultrahigh-Performance Concrete Connections
- 1 June 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 24 (6)
Abstract
Precast concrete bridges have many advantages over cast-in-place construction. Prefabrication typically requires less time at the site due to the ease of installation. Furthermore, production in a controlled environment can result in higher bridge quality. However, the quality of field connections is a key challenge in ensuring the integrity of the bridge seismic performance. A Federal Highway Administration (FHWA) research project conducted at the University at Buffalo in 2012 using ultrahigh-performance concrete (UHPC) to evaluate the suitability of deck-level connections between precast prestressed concrete bridge girders is reported in this paper. The structural performance of the UHPC connections has been investigated by both cyclic and static loading tests at the FHWA Turner–Fairbank Highway Research Center. This paper discusses the results of a shake table study on the seismic performance of two full-scale prestressed girders connected with UHPC. The main objective of this experimental study was to observe the seismic performances of the UHPC connection between two bridge girders to assess the applicability of using UHPC-connected precast bridge girders in moderate to high earthquake regions. The experimental results show that the use of a UHPC connection with straight rebar protruding from the prestressed girders provided adequate resilience even under high-level earthquake ground motions.Keywords
This publication has 18 references indexed in Scilit:
- Experimental study of strand splice connections in UHPC for continuous precast prestressed concrete bridgesEngineering Structures, 2017
- Seismic-Resistant Bridge Columns with Ultrahigh-Performance Concrete SegmentsJournal of Bridge Engineering, 2016
- Experimental study of CFDST columns infilled with UHPC under close-range blast loadingInternational Journal of Impact Engineering, 2016
- Low-Damage Precast Columns for Accelerated Bridge Construction in High Seismic ZonesJournal of Bridge Engineering, 2016
- Performance Evaluation of Longitudinal Ultrahigh-Performance Concrete Closure Pour Connection for Use in Modular Bridge Construction: Pairwise Comparison of Capacity and Ductility at Failure Limit StateTransportation Research Record: Journal of the Transportation Research Board, 2016
- UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zonesEngineering Structures, 2015
- Experimental Characterization of Ultrahigh-Performance Concrete Bridge Deck SystemJournal of Bridge Engineering, 2015
- System identification in structural engineeringScientia Iranica, 2012
- NONLINEAR SYSTEM IDENTIFICATION AND CONTROL BASED ON MODULAR NEURAL NETWORKSInternational Journal of Neural Systems, 2011
- Improved Longitudinal Joint Details in Decked Bulb Tees for Accelerated Bridge Construction: Concept DevelopmentJournal of Bridge Engineering, 2010