Strength of single‐phase high‐entropy carbide ceramics up to 2300°C
Top Cited Papers
- 11 September 2020
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 104 (1) , 419-427
Abstract
The mechanical properties of single‐phase (Hf,Zr,Ti,Ta,Nb)C high‐entropy carbide (HEC) ceramics were investigated. Ceramics with relative density >99% and an average grain size of 0.9 ± 0.3 µm were produced by a two‐step process that involved carbothermal reduction at 1600°C and hot pressing at 1900°C. At room temperature, Vickers hardness was 25.0 ± 1.0 GPa at a load of 4.9 N, Young's modulus was 450 GPa, chevron notch fracture toughness was 3.5 ± 0.3 MPa·m 1/2 , and four‐point flexural strength was 421 ± 27 MPa. With increasing temperature, flexural strength stayed above ~400 MPa up to 1800°C, then decreased nearly linearly to 318 ± 21 MPa at 2000°C and to 93 ± 10 MPa at 2300°C. No significant changes in relative density or average grain size were noted after testing at elevated temperatures. The degradation of flexural strength above 1800°C was attributed to a decrease in dislocation density that was accompanied by an increase in dislocation motion. These are the first reported flexural strengths of HEC ceramics at elevated temperatures.Keywords
This publication has 31 references indexed in Scilit:
- Phase, hardness, and deformation slip behavior in mixed HfxTa1-xCActa Materialia, 2018
- High-entropy alloy: challenges and prospectsMaterials Today, 2016
- High-strength TiB 2 –TaC ceramic composites prepared using reactive spark plasma consolidationCeramics International, 2016
- Ultra‐High Temperature Ceramics2014
- Properties of zirconium carbide for nuclear fuel applicationsJournal of Nuclear Materials, 2013
- Low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system: Microstructure and phase analysisActa Materialia, 2013
- Microstructure and properties of HfC and TaC-based ceramics obtained by ultrafine powderJournal of the European Ceramic Society, 2011
- Plastic deformation1998
- Role of Grain Size in the Strength and R‐Curve Properties of AluminaJournal of the American Ceramic Society, 1990
- Deformation of Poly crystalline Transition Metal CarbidesJournal of the American Ceramic Society, 1967