Interface Toughness of Carbon Nanotube Reinforced Epoxy Composites
Authors:
- Yogeeswaran GanesanYGYogeeswaran Ganesan
- Cheng PengCPCheng Peng
- Yang LuYLYang Lu
- Phillip E. LoyaPLPhillip E. Loya
- Padraig MoloneyPMPadraig Moloney
- Enrique BarreraEBEnrique Barrera
- Boris I. YakobsonBYBoris I. Yakobson
- James M. TourJTJames M. Tour
- Roberto BallariniRBRoberto Ballarini
- Jun LouJLJun Lou
- 7 January 2011
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 3 (2) , 129-134
Abstract
Traditional single-fiber pull-out type experiments were conducted on individual multiwalled carbon nanotubes (MWNT) embedded in an epoxy matrix using a novel technique. Remarkably, the results are qualitatively consistent with the predictions of continuum fracture mechanics models. Unstable interface crack propagation occurred at short MWNT embedments, which essentially exhibited a linear load−displacement response prior to peak load. Deep embedments, however, enabled stable crack extension and produced a nonlinear load−displacement response prior to peak load. The maximum pull-out forces corresponding to a wide range of embedments were used to compute the nominal interfacial shear strength and the interfacial fracture energy of the pristine MWNT-epoxy interface.Keywords
This publication has 18 references indexed in Scilit:
- Development and Application of a Novel Microfabricated Device for the In Situ Tensile Testing of 1-D NanomaterialsJournal of Microelectromechanical Systems, 2010
- A Multi-step Method for In Situ Mechanical Characterization of 1-D Nanostructures Using a Novel Micromechanical DeviceExperimental Mechanics, 2009
- The mechanical characterization of carbon-nanotube-reinforced polymer-matrix nanocomposites: An unfolding story of interfaceJOM, 2009
- Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvementsNature Nanotechnology, 2008
- Fracture Transitions at a Carbon‐Nanotube/Polymer InterfaceAdvanced Materials, 2005
- Nano measurements with micro-devices: mechanical properties of hydrated collagen fibrilsJournal of The Royal Society Interface, 2005
- Interfacial fracture energy measurements for multi-walled carbon nanotubes pulled from a polymer matrixComposites Science and Technology, 2004
- Interfacial characteristics of a carbon nanotube–polystyrene composite systemApplied Physics Letters, 2001
- Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile LoadScience, 2000
- Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and NanotubesScience, 1997