A Hybrid Fault Tolerant Architecture for Robustness Improvement of Digital Circuits
Authors:
- D.A. TranDTD.A. Tran
- A. VirazelAVA. Virazel
- A. BosioABA. Bosio
- L. DililloLDL. Dilillo
- P. GirardPGP. Girard
- S. PravossoudovitchSPS. Pravossoudovitch
- H.-J. WunderlichHWH.-J. Wunderlich
- 1 November 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10817735,p. 136-141
Abstract
In this paper, a novel hybrid fault tolerant architecture for digital circuits is proposed in order to enable the use of future CMOS technology nodes. This architecture targets robustness, power consumption and yield at the same time, at area costs comparable to standard fault tolerance schemes. The architecture increases circuit robustness by tolerating both transient and permanent online faults. It consumes less power than the classical Triple Modular Redundancy (TMR) approach while utilizing comparable silicon area. It overcomes many permanent faults occurring throughout manufacturing while still tolerating soft errors introduced by particle strikes. These can be done by using scalable redundancy resources, while keeping the hardened combinational logic circuits intact. The technique combines different types of redundancy: information redundancy for error detection, temporal redundancy for soft error correction and hardware redundancy for hard error tolerance. Results on largest ISCAS and ITC benchmark circuits show that our approach has an area cost negligible of about 2% to 3% with a power consumption saving of about 30% compared to TMR. Finally, it deals with aging phenomenon and thus, increases the expected lifetime of logic circuits.Keywords
This publication has 11 references indexed in Scilit:
- Is triple modular redundancy suitable for yield improvement?IET Computers & Digital Techniques, 2009
- RazorII: In Situ Error Detection and Correction for PVT and SER ToleranceIEEE Journal of Solid-State Circuits, 2008
- Using TMR Architectures for Yield Improvement2008
- Bilateral Testing of Nano-scale Fault-tolerant Circuits2006
- Efficient Realization of Parity Prediction Functions in FPGAsJournal of Electronic Testing, 2004
- Making typical silicon matter with RazorComputer, 2004
- Fault tolerant design of combinational and sequential logic based on a parity check code2004
- Design for testability and test generation for static redundancy system level fault-tolerant circuits2003
- RSYN: a system for automated synthesis of reliable multilevel circuitsIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 1994
- A fault-tolerant FFT processorIEEE Transactions on Computers, 1988