Damping systems that are effective over a wide range of displacement amplitudes using metallic yielding component and viscoelastic damper in series
- 14 May 2014
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 43 (14) , 2097-2114
Abstract
SUMMARY: A damper system that absorbs energy over a wide range of displacement amplitudes during building vibration was proposed. This system uses a serial connection of a metallic yielding component and viscoelastic damper with a displacement limit mechanism. Three types of the system were developed and tested: a diagonal bracing type, inverted V bracing type, and wall type. The test results showed that all these systems have damping ratios higher than 8% at small vibration amplitudes on the order of 0.1 mm. For a large vibration, a displacement limit mechanism with two pins limited the displacement of the viscoelastic damper as designed. Analytical simulations established that the system reduced the acceleration and the story drift to 60–70% and 80%, respectively, during a small earthquake compared with a conventional metallic yielding damper system. Furthermore, it showed an equivalent control performance during a severe earthquake. The damper system requires that a clearance be maintained for the displacement limit mechanism. However, this may be lost through construction error, residual displacement after an earthquake, and temperature effects. The changes in the clearance due to these effects were discussed. Copyright © 2014 John Wiley & Sons, Ltd.Keywords
This publication has 15 references indexed in Scilit:
- Seismic reliability of steel moment resisting framed buildings retrofitted with buckling restrained bracesEarthquake Engineering & Structural Dynamics, 2011
- Experimental tests on full‐scale RC unretrofitted frame and retrofitted with buckling‐restrained bracesEarthquake Engineering & Structural Dynamics, 2011
- Control of the earthquake and wind dynamic response of steel‐framed buildings by using additional braces and/or viscoelastic dampersEarthquake Engineering & Structural Dynamics, 2011
- HDR devices for the seismic protection of frame structures: Experimental results and numerical simulationsEarthquake Engineering & Structural Dynamics, 2009
- Effect of Supplemental Viscous Damping on the Seismic Response of Structural Systems with Metallic DampersJournal of Structural Engineering, 2007
- Experimental Evaluation of a Large-Scale Buckling-Restrained Braced FrameJournal of Structural Engineering, 2007
- State of the art of buckling-restrained braces in AsiaJournal of Constructional Steel Research, 2005
- Component Testing, Seismic Evaluation and Characterization of Buckling-Restrained BracesJournal of Structural Engineering, 2004
- Seismic Response of Full-Scale Structure with Added Viscoelastic DampersJournal of Structural Engineering, 2004
- Practical applications of active mass dampers with hydraulic actuatorEarthquake Engineering & Structural Dynamics, 2001