Improving Layer Adhesion of Co-Extruded Polymer Sheets by Inducing Interfacial Flow Instabilities
Open Access
Abstract
Co-extrusion is commonly used to produce polymer multilayer products with different materials tailoring the property profiles. Adhesion between the individual layers is crucial to the overall performance of the final structure. Layer adhesion is determined by the compatibility of the polymers at the interface and their interaction forces, causing for example the formation of adhesive or chemical bonds or an interdiffusion layer. Additionally, the processing conditions, such as temperature, residence time, cooling rate, and interfacial shear stress, have a major influence on the interactions and hence resulting layer adhesion. Influences of temperature and residence time are already quite well studied, but influence of shear load on the formation of an adhesion layer is less explored and controversially discussed in existing literature. In this work, we investigated the influence of different processing conditions causing various shear loads on layer adhesion for a two-layer co-extruded polymer sheet using a polypropylene and polypropylene talc compound system. Therefore, we varied the flow rates and the flow geometry of the die. Under specific conditions interfacial flow instabilities are triggered that form micro layers in the transition regime between the two layers causing a major increase in layer adhesion. This structure was analyzed using confocal Raman microscopy. Making use of these interfacial flow instabilities in a controlled way enables completely new opportunities and potentials for multi-layer products.Keywords
Funding Information
- Österreichische Forschungsförderungsgesellschaft (881844)
This publication has 20 references indexed in Scilit:
- Architecture and Design of the HeuristicLab Optimization Environment2014
- Coextrusion of Multilayer Structures, Interfacial Phenomena2013
- Adhesion of polymersProgress in Polymer Science, 2009
- Theoretical and experimental analysis of interfacial instabilities in coextrusion flowsJournal of Applied Polymer Science, 2005
- Interfacial instabilities in coextrusion flows of low‐density polyethylenes: Experimental studiesPolymer Engineering & Science, 2000
- Polymer‐polymer interdiffusion during coextrusionPolymer Engineering & Science, 1991
- The Interdiffusion of PolymersScience, 1990
- Interfacial flow instability in multilayer coextrusionPolymer Engineering & Science, 1978
- Studies on multilayer film coextrusion II. Interfacial instability in flat film coextrusionPolymer Engineering & Science, 1978
- The role of diffusion phenomena in polymer-to-polymer adhesionJournal of Applied Polymer Science, 1963