Experimental Study of Sinkhole Propagation Induced by a Leaking Pipe Using Fibre Bragg Grating Sensors
Open Access
Abstract
Sinkhole formation caused by leaking pipes in karst soluble rocks is a significant concern, leading to infrastructure damage and safety risks. In this paper, an experiment was conducted to investigate sinkhole formation in dense sand induced by a leaking pipe. Fibre Bragg grating (FBG) sensors were used to record the strain. A balloon was gradually deflated within a bed of wet silica sand to create an underground cavity. Eighteen FBG sensors, with a wavelength range between 1550 nm and 1560 nm, were embedded horizontally and vertically in the physical model at different levels to monitor deformation at various locations. A leaking pipe was installed to induce the collapse of the formed arch above the cavity. The strain measurements suggested the following four phases in the sinkhole formation process: (1) cavity formation, (2) progressive weathering and erosion, (3) catastrophic collapse, and (4) subsequent equilibrium conditions. The results showed differences in the strain signatures and distributions between the horizontal and vertical measurements. During the critical phase of the sinkhole collapse, the horizontal measurements primarily showed tension, while the vertical measurements indicated compression. This investigation demonstrates the effectiveness of FBGs as advanced monitoring tools for sinkhole precursor identification. The study also suggests using FBGs in geotechnical monitoring applications to improve the understanding and mitigation of sinkholes and related geohazards.Keywords
All Related Versions
Funding Information
- Telkom SA SOC Ltd. (HLHA23X Task ALC S100, WRC 2937/1/22)
- the CSIR National Laser Centre and African Laser Centre (HLHA23X Task ALC S100, WRC 2937/1/22)
- Water Research Commission (HLHA23X Task ALC S100, WRC 2937/1/22)
- the Photonics Research Centre at the University of Johannesburg (HLHA23X Task ALC S100, WRC 2937/1/22)
This publication has 31 references indexed in Scilit:
- InSAR Measurements and Viscoelastic Modeling of Sinkhole Precursory Subsidence: Implications for Sinkhole Formation, Early Warning, and Sediment PropertiesJournal of Geophysical Research: Earth Surface, 2018
- Identifying the boundaries of sinkholes and subsidence areas via trenching and establishing setback distancesEngineering Geology, 2018
- Response of heterogeneous slopes to increased surcharge loadComputers and Geotechnics, 2016
- Internal deformation monitoring for centrifuge slope model with embedded FBG arraysLandslides, 2016
- Natural and human-induced sinkhole hazards in Saudi Arabia: distribution, investigation, causes and impactsHydrogeology Journal, 2015
- A review on natural and human-induced geohazards and impacts in karstEarth-Science Reviews, 2014
- A performance based approach to dolomite risk managementEnvironmental Earth Sciences, 2011
- Management and mitigation of sinkholes on karst lands: an overview of practical applicationsEnvironmental Geology, 2007
- Identification, prediction, and mitigation of sinkhole hazards in evaporite karst areasEnvironmental Geology, 2007
- A genetic classification of sinkholes illustrated from evaporite paleokarst exposures in SpainEnvironmental Geology, 2007