Grafted Nanoparticle Surface Wetting during Phase Separation in Polymer Nanocomposite Films
- 29 July 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (31) , 37628-37637
Abstract
Wetting of polymer-grafted nanoparticles (NPs) in a polymer nanocomposite (PNC) film is driven by a difference in surface energy between components as well as bulk thermodynamics, namely, the value of the interaction parameter, χ. The interplay between these contributions is investigated in a PNC containing 25 wt % polymethyl methacrylate (PMMA)-grafted silica NPs (PMMA-NPs) in poly(styrene-ran-acrylonitrile) (SAN) upon annealing above the lower critical solution temperature (LCST, 160 °C). Atomic force microscopy (AFM) studies show that the areal density of particles increases rapidly and then approaches 80% of that expected for random close-packed hard spheres. A slightly greater areal density is observed at 190 °C compared to 170 °C. The PMMA-NPs are also shown to prevent dewetting of PNC films under conditions where the analogous polymer blend is unstable. Transmission electron microscopy (TEM) imaging shows that PMMA-NPs symmetrically wet both interfaces and form columns that span the free surface and substrate interface. Using grazing-incidence Rutherford backscattering spectrometry (GI-RBS), the PMMA-NP surface excess (Z*) initially increases rapidly with time and then approaches a constant value at longer times. Consistent with the areal density, Z* is slightly greater at deeper quench depths, which is attributed to the more unfavorable interactions between the PMMA brush and SAN segments. The Z* values at early times are used to determine the PMMA-NP diffusion coefficients, which are significantly larger than theoretical predictions. These studies provide insights into the interplay between wetting and phase separation in PNCs and can be utilized in nanotechnology applications where surface-dependent properties, such as wettability, durability, and friction, are important.Keywords
Funding Information
- Agence Nationale de la Recherche (ANR/15-PIRE-0001-01, ANR/15-PIRE-0001-07)
- Semiconductor Research Corporation (2797.001)
- Centre National de la Recherche Scientifique (UMR/5819)
- National Science Foundation (CBET/1706014, DMR/1905912, MRSEC-DMR/1720530, PIRE/1545884)
This publication has 42 references indexed in Scilit:
- The Mechanical Properties of Epoxy Composites Filled with Rubbery Copolymer Grafted SiO2Polymers, 2012
- Polymer NanocompositesMRS Bulletin, 2007
- Self-Regulated Structures in Nanocomposites by Directed Nanoparticle AssemblyNano Letters, 2005
- Influence of Nanoparticles on Miscibility of Polymer Blends. A Simple TheoryMacromolecules, 2005
- Influence of Lateral Confinement on Phase Separation in Thin Film Polymer BlendsMacromolecules, 2000
- Hydrodynamic-flow-driven wetting in thin film polymer blends: Growth kinetics and morphologyPhysical Review E, 2000
- The surface composition of miscible polymer blendsPolymer, 1993
- Determination of the concentration profile at the surface of deuterated polystyrene/hydrogenated polystyrene blends using high-resolution ion scattering techniquesMacromolecules, 1991
- Segregation of block copolymer micelles to surfaces and interfacesMacromolecules, 1991
- Surface Enrichment in an Isotopic Polymer BlendPhysical Review Letters, 1989