Study of Stress-Strain Behavior of the Laminated Plate Damaged by Delamination
Authors:
- A KondratievA Kondratiev
- L SmovziukLSL Smovziuk
- M ShevtsovaMSM Shevtsova
- T NabokinaTNT Nabokina
- A TsaritsynskyiATA Tsaritsynskyi
Open Access
- 1 June 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1164 (1)
Abstract
The process of manufacturing of the structures of polymeric composite materials is accompanied by various technological defects. Delamination defects have the greatest impact on the bearing capacity of the composite structures. The method for assessment of the stress-strain behavior of a panel structure made of polymeric composite materials, which is damaged by delamination, has been developed. This method allows determining the degree of stress concentration in the area of step change in thickness and identifying the most dangerous point where the structural failure may start. In contrast to the classical theory of laminated plates, the proposed model gives an opportunity to simplify three-dimensional problem by setting the displacement field on the interfaces of layers and their linear interpolation over the plate thickness, taking into account the transverse shear deformation. Stress-strain behavior of the plate with delamination was determined according to the computational model of the plate with a cut for the case when the layers in the defect area cannot take up the applied load. According to the results obtained, distribution of stresses over the plate thickness changes significantly in the area of step transition to the delamination and near it. At the distance, it approaches the stress distribution in a plate of the uniform thickness. It allowed confirming the previous conclusions that maximum rise in stresses may occur in the weakened layer near the delamination, initiating the failure of the structure. Reliability of the developed mathematical model is confirmed by comparison with the results of experimental studies. The resulting maximum error does not exceed 7% and demonstrates good convergence of results. With the use of the developed method, it is possible to solve the important practical tasks of studying the loss of performance of the panel structures made of polymeric composite materials with delaminations and determining the optimal methods for repair of such defects.Keywords
This publication has 24 references indexed in Scilit:
- Analysis of Laminated Composites Subjected to Impact2021
- New Possibilities of Creating the Efficient Dimensionally Stable Composite Honeycomb Structures for Space Applications2020
- Study on the effect of plasticizers and thermoplastics on the strength and toughness of epoxy resinsNaukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2020
- Improving the mass efficiency of a composite launch vehicle head fairing with a sandwich structureEastern-European Journal of Enterprise Technologies, 2019
- Determining the dynamic loading on a semi-wagon when fixing it with a viscous coupling to a ferry deckEastern-European Journal of Enterprise Technologies, 2019
- Criterion-Based Assessment of Performance Improvement for Aircraft Structural Parts with Thermal Spray CoatingsJournal of Superhard Materials, 2019
- Scientific Substantiation of Thermal Leveling for Deformations in the Car StructureInternational Journal of Engineering & Technology, 2018
- Stability and Process of Destruction of Compressed Plate of Layered Composite Materials With DefectsIOP Conference Series: Materials Science and Engineering, 2016
- Analysis of damage localization in composite laminates using a discrete damage modelComposites Part B: Engineering, 2014
- Modelling failure of composite specimens with defects under compression loadingComposites Part A: Applied Science and Manufacturing, 2013