Controlling the nucleation environment offilms and their related properties
- 7 January 2002
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review B
- Vol. 65 (4) , 045415
Abstract
Cubic boron nitride films were deposited using radio-frequency (rf) magnetron sputtering. A type of turbostratic boron nitride growth was found by reducing the substrate bias during deposition. Transmission electron microscopy (TEM) study showed that the served as a different nucleation environment for compared to those reported in the literature by many other groups. The nucleation environment corresponded to a lower film internal stress level and thus facilitated the production of thicker films. The fraction of different environments could be controlled and altered by varying the deposition conditions. The films containing different environments were compared in phase concentration, stoichiometry, microstructure, and internal stress level. Additional insight was added to the film growth mechanism.
Keywords
This publication has 24 references indexed in Scilit:
- Review of advances in cubic boron nitride film synthesisMaterials Science and Engineering: R: Reports, 1997
- Reduced bias growth of pure-phase cubic boron nitrideApplied Physics Letters, 1997
- Formation of c-BN thin films under reduced ion impactSurface and Coatings Technology, 1997
- Crystallographic texture in cubic boron nitride thin filmsJournal of Applied Physics, 1996
- Vapour phase deposition of cubic boron nitrideDiamond and Related Materials, 1996
- Synthesis of cubic boron nitride thin filmsSurface and Coatings Technology, 1996
- Recent results in cubic boron nitride deposition in light of the sputter modelDiamond and Related Materials, 1995
- Transmission electron microscopic study of c -BN films deposited on a Si substrateApplied Physics Letters, 1995
- Effects of ambient conditions on the adhesion of cubic boron nitride films on silicon substratesThin Solid Films, 1994
- Phase evolution in boron nitride thin filmsJournal of Materials Research, 1993