Study on Protection Mechanism of 30CrMnMo-UHMWPE Composite Armor
Open Access
Abstract
The penetration of a 30CrMnMo ultra-high molecular weight polyethylene armor by a high-speed fragment was investigated via experiments and simulations. Analysis of the projectile revealed that the nose (of the projectile) is in the non-equilibrium state at the initial stage of penetration, and the low-speed regions undergo plastic deformation. Subsequently, the nose-tail velocities of the projectile were virtually identical and fluctuated together. In addition, the effective combination of the steel plate and polyethylene (PE) laminate resulted in energy absorption by the PE just before the projectile nose impacts the laminate. This early absorption plays a positive role in the ballistic performance of the composite armor. Further analysis of the internal energy and mass loss revealed that the PE laminate absorbs energy via the continuous and stable failure of PE fibers during the initial stages of penetration, and absorbs energy via deformation until complete penetration occurs. The energy absorbed by the laminate accounts for 68% of the total energy absorption, indicating that the laminate plays a major role in energy absorption during the penetration process.Keywords
Funding Information
- National Natural Science Foundation of China (51571031)
This publication has 29 references indexed in Scilit:
- Ballistic impact response of an UHMWPE fiber reinforced laminate encasing of an aluminum-alumina hybrid panelInternational Journal of Impact Engineering, 2015
- Influence of Joining Interlayer on Impact Damage to Laminated Boron Carbide CeramicsInternational Journal of Applied Ceramic Technology, 2014
- Fractographic observations on Dyneema® composites under ballistic impactComposites Part A: Applied Science and Manufacturing, 2013
- Finite element simulation of ceramic/composite armor under ballistic impactComposites Part B: Engineering, 2011
- Numerical simulation of ceramic composite armor subjected to ballistic impactComposites Part B: Engineering, 2010
- Penetration analysis of a projectile in ceramic composite armorComposite Structures, 2008
- An experimental study of penetration resistance of ceramic armour subjected to projectile impactInternational Journal of Impact Engineering, 2005
- Impact failure mechanisms in alumina tiles on finite thickness support and the effect of confinementInternational Journal of Impact Engineering, 2000
- Impact studies of five ceramic materials and pyrexInternational Journal of Impact Engineering, 1999
- Applications of Ceramics in Armor ProductsKey Engineering Materials, 1996