Electrodeposition and characterization of Zn–Sn alloy coatings from a deep eutectic solvent based on choline chloride for corrosion protection
Authors:
- 18 December 2014
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 47 (3) , 403-412
Abstract
With the aim of obtaining high corrosion resistant Zn–Sn alloy coatings from an ionic liquid, the effects of electrodeposition potential and electrolyte composition on the electrodeposition behavior, film composition, morphology and corrosion performance were investigated. Cyclic voltammograms indicate that Zn and Sn were co‐deposited at distinct reduction potentials as pure Zn and Sn elements. In addition, the phase composition analysis also showed that the obtained Zn–Sn alloy deposits (8 wt.%–45 wt.% Zn) consist of a two‐phase mechanical mixture of small aggregates of Zn and Sn metals. The Zn content of the alloy significantly increases as the electrodeposition potential and electrolyte Zn (II)/Sn (II) ratio increase. The corrosion performance study of the obtained Zn–Sn coatings showed that they have a passivation behavior and their corrosion resistance increases as the alloy‐Sn content increases. To improve their morphological properties, ethylene diamine tetraacetic acid additive was introduced into the electrolyte and greatly improved the morphology and corrosion resistance of the deposits. For the first time, it was shown that high corrosion resistance Zn–Sn coatings can be obtained from ionic liquids. Copyright © 2014 John Wiley & Sons, Ltd.Keywords
Funding Information
- National Natural Science Foundation of China (51271169)
- National Natural Science Foundation of China (51001089)
- Foundation of Zhejiang Provincial Key Laboratory 388 for cutting tools (ZD201204)
This publication has 27 references indexed in Scilit:
- Investigation of Sn–Zn electrodeposition from acidic bath on EQCMJournal of Alloys and Compounds, 2011
- Silver–zinc electrodeposition from a thiourea solution with added EDTA or HEDTAElectrochimica Acta, 2009
- Composition control of tin–zinc electrodeposits through means of experimental strategiesMaterials Chemistry and Physics, 2007
- Tin–zinc electrodeposition from sulphate–tartrate bathsJournal of Electroanalytical Chemistry, 2005
- Electrodeposition of eutectic Sn–Zn alloy by pulse platingJournal of Materials Research, 2003
- EQCM studies of the electrodeposition and corrosion of tin–zinc coatingsElectrochimica Acta, 2001
- Zn and Zn–Sn alloy coatings with and without chromate layers. Part I: Corrosion resistance and structural analysisJournal of Applied Electrochemistry, 1999
- Tin‐zinc platingAnti-Corrosion Methods and Materials, 1998
- Electrodeposition and characterization of tin-zinc alloy coatingsApplied Surface Science, 1996
- Electrodeposition of low tin content zinc-tin alloysSurface and Coatings Technology, 1996