Effect of welding speed on microstructure, hardness and tensile properties in laser welding of advanced high strength steel
Authors:
- 1 October 2013
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 18 (7) , 581-590
Abstract
The increasing demand of lightweight and durability makes advanced high strength steel attractive for future automotive applications. In this study, 0·8 mm thick bare 600, 800 and 1000 MPa grade dual phase steel and 1500 MPa grade martensitic steel were laser welded, and the effect of welding speed on weld bead geometry, microhardness, microstructure and tensile properties was investigated. The steels exhibited similar weldability, and a critical welding speed for acceptable joint was determined as 25 mm s−1. A linear relationship of the hardness at fusion zone with carbon equivalent was observed, while carbon content showed a poorer linear fit. Heat affected zone (HAZ) softening increased with the steel grades due to the higher martensite volume fraction of the base metal in stronger steels. In addition, decrease of welding speed led to longer tempering time and consequently higher degree of HAZ softening. Correlations between tensile strength and hardness were also investigated.Keywords
This publication has 20 references indexed in Scilit:
- Optimization of laser welding thin-gage galvanized steel via response surface methodologyOptics and Lasers in Engineering, 2012
- Shielding gas influences on laser weldability of tailored blanks of advanced automotive steelsApplied Surface Science, 2010
- Fatigue properties of laser welded dual-phase steel jointsProcedia Engineering, 2010
- Metallurgical and Mechanical Properties of Fusion Zones of TRIP Steels in Laser WeldingISIJ International, 2008
- Warm and hot punching of ultra high strength steel sheetCIRP Annals, 2008
- Investigation of 22MnB5 formability in hot stamping operationsJournal of Materials Processing Technology, 2006
- Effects of process parameters on the bead geometry of laser beam butt welded stainless steel sheetsThe International Journal of Advanced Manufacturing Technology, 2006
- Effect of laser welding parameters on the heat input and weld-bead profileJournal of Materials Processing Technology, 2005
- CO2 Laser Welding Characteristics of 800 MPa Class TRIP SteelISIJ International, 2005
- Weldability of Modern Steel Materials.ISIJ International, 1995