Effects of Manganese Content and Heat Treatment Condition on Mechanical Properties and Microstructures of Fine-Grained Low Carbon TRIP-Aided Steels
Author:
- 12 January 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 638-642, 3313-3318
Abstract
The mechanical properties and microstructures of alternative low carbon TRIP-aided steels in which manganese contents mediate between conventional low-alloyed TRIP-aided steels and TWIP steel have been investigated. A variety of microstructures, from a single austenite phase to multiple phase mixtures, was attained according to chemical compositions as well as heat treatment schedule. By means of reverse transformation of martensite combined with controlled annealing, a remarkable grain refinement being responsible for stabilization of austenite could be achieved. In case of the duplex (+ ) microstructures in 6Mn and 7Mn alloys, large amount of retained austenite more than 30 % contributed to substantial improvement of ductility compared to the conventional TRIP-aided steels having similar tensile strength level. In nearly single austenitic 13Mn alloy, the annealed sheet steel exhibited high tensile strength of 1.3 GPa with sufficient ductility due to the stain induced martensite transformation of fine grained austenite.Keywords
This publication has 8 references indexed in Scilit:
- Design method for TRIP-aided multiphase steel based on a microstructure-based modelling for transformation-induced plasticity and mechanically induced martensitic transformationMaterials Science and Engineering: A, 2009
- Microstructure and Mechanical Behaviors of 0.1C-13Mn Metastable Austenitic SteelMetallurgical and Materials Transactions A, 2008
- Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steelScripta Materialia, 2007
- Microstructures and Mechanical Properties of High‐Strength Fe‐Mn‐Al‐C Light‐Weight TRIPLEX SteelsSteel Research International, 2006
- Formation of Retainted Austenite and Mechanical Properties of 4~8%Mn Hot Rolled TRIP SteelsKorean Journal of Materials Research, 2005
- Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes.ISIJ International, 2003
- Dependence of strength–ductility characteristics on thermal history in lowcarbon, 5 wt-%Mn steelsMaterials Science and Technology, 1989
- Ultrafine-grained microstructures and mechanical properties of alloy steelsMetallurgical Transactions, 1972