A New Method to Measure the Parasitic Parameter Model of IGBT on Bias Voltage
- 30 March 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (5) , 2387-2394
Abstract
With the increase in frequency, IGBT can generate serious electromagnetic interference (EMI) when it is turned on and off quickly. The variations in voltage and current produced by switching devices in the transient process are the main sources of high-frequency EMI. The ultrafast switching characteristics of IGBT (i.e., high du/dt or di/dt) will cause serious switching oscillation, EMI noise, and additional power loss. The speed of voltage and current variations in transient process is determined by the interelectrode capacitances of the semiconductor switch. Due to the structural characteristics of IGBT, the interelectrode capacitances will change based on the difference in external voltage. This article introduces an improved method to measure the parasitic inductance and resistance of IGBT. This method perfectly avoids the interference of Z ground which refers to the floating terminal impedance to the ground. The parasitic parameters of IGBT can be obtained by fitting the impedance of IGBT with genetic algorithm. The article also introduces a method to measure the parasitic parameters of IGBT on bias voltage with impedance analyzer and dc source. In the experiment, the capacitance is used to protect the impedance analyzer to avoid the dc current from the dc source. Finally, a double-pulse test circuit is used to verify the parasitic parameter model of IGBT measured in this article. By comparing the current and voltage waveforms when IGBT is turned on and off and the voltage frequency domain waveforms in multiple cycles, it is proved that the parasitic parameter model of IGBT is applicable to the circuit.Keywords
Funding Information
- National Natural Science Foundation of China (51277032)
- State Administration of Science, Technology and Industry for National Defense (B0202)
This publication has 21 references indexed in Scilit:
- A New Characterization Technique for Extracting Parasitic Inductances of SiC Power MOSFETs in Discrete and Module Packages Based on Two-Port S-Parameters MeasurementIEEE Transactions on Power Electronics, 2018
- Measurement Methodology for Accurate Modeling of SiC MOSFET Switching Behavior Over Wide Voltage and Current RangesIEEE Transactions on Power Electronics, 2017
- Comprehensive Study of the Performance of SiC MOSFET-Based Automotive DC–DC Converter Under the Influence of Parasitic InductanceIEEE Transactions on Industry Applications, 2016
- High-Frequency Experimental Characterization and Modeling of Six Pack IGBTs Power ModulesIEEE Transactions on Industrial Electronics, 2016
- A Simplified Behavioral MOSFET Model Based on Parameters Extraction for Circuit SimulationsIEEE Transactions on Power Electronics, 2015
- 3-D Electromagnetic Modeling of Parasitics and Mutual Coupling in EMI FiltersIEEE Transactions on Power Electronics, 2014
- Multiprobe Measurement Method for Voltage-Dependent Capacitances of Power Semiconductor Devices in High VoltageIEEE Transactions on Power Electronics, 2013
- Measurement Technique for Symmetrical Reciprocal Three-Port Devices Using Two-Port Vector Network AnalyzerIEEE Transactions on Instrumentation and Measurement, 2013
- Behavioral Modeling of Chokes for EMI Simulations in Power ElectronicsIEEE Transactions on Power Electronics, 2012
- The Current Sharing Optimization of Paralleled IGBTs in a Power Module Tile Using a PSpice Frequency Dependent Impedance ModelIEEE Transactions on Power Electronics, 2008