Improved Thermal Processing of Polylactic Acid/Oxidized Starch Composites and Flame-Retardant Behavior of Intumescent Non-Wovens
Open Access
Abstract
Thermoplastic processing and spinning of native starch is very challenging due to (a) the linear and branched polymers (amylose and amylopectin) present in its structure and (b) the presence of inter-and-intramolecular hydrogen bond linkages in its macromolecules that restrict the molecular chain mobility. Therefore, in this study, oxidized starch (OS) (obtained after oxidation of native starch with sodium perborate) was melt-blended with polylactic acid (PLA) polymer to prepare PLA/OS blends that were then mixed together with ammonium polyphosphate (APP), a halogen-free flame retardant (FR) used as acid donor in intumescent formulations on twin-screw extruder to prepare PLA/OS/APP composites. OS with different concentrations also served as bio-based carbonic source in intumescent formulations. PLA/OS/APP composites were melt spun to multifilament fibers on pilot scale melt-spinning machine and their crystallinity and mechanical properties were optimized by varying spinning parameters. The crystallinity of the fibers was studied by differential scanning calorimetry and thermal stabilities were analyzed by thermogravimetric analysis. Scanning electron microscopy was used to investigate the surface morphology and dispersion of the additives in the fibers. Needle-punched non-woven fabrics from as prepared melt-spun PLA/OS/APP fibers were developed and their fire properties such as heat release rate, total heat release, time to ignition, residual mass % etc. by cone calorimetry test were measured. It was found that PLA/OS/APP composites can be melt spun to multifilament fibers and non-woven flame-retardant fabrics produced thereof can be used in industrial FR applications.Keywords
Funding Information
- Operational Programme South Netherlands (35930032N)
This publication has 42 references indexed in Scilit:
- Antibacterial polymer fibres by rosin compounding and melt-spinningMaterials Today Communications, 2019
- Effects of silica on the morphology, structure, and properties of thermoplastic cassava starch/poly(vinyl alcohol) blendsJournal of Applied Polymer Science, 2016
- Poly(lactic acid) melt-spun fibers reinforced with functionalized cellulose nanocrystalsRSC Advances, 2016
- Effect of starch/polylactic acid ratio on the interdependence of two-phase and the properties of compositesJournal of Wuhan University of Technology-Mater. Sci. Ed., 2015
- Recent advances in production of poly(lactic acid) (PLA) nanocomposites: a versatile method to tune crystallization properties of PLANanocomposites, 2014
- Poly(Lactic Acid) and Poly(Butylene Succinate) Blend Fibers Prepared by Melt Spinning TechniqueEnergy Procedia, 2013
- Effect of process parameters on properties of wet‐spun poly(L,D‐lactide) copolymer multifilament fibersJournal of Applied Polymer Science, 2009
- The influence of the structure of starch on the mechanical, morphological and thermal properties of poly (ε-caprolactone) in starch blendsJournal of Materials Science, 2007
- Morphology, thermomechanical properties, and biodegradability of low density polyethylene/starch blendsJournal of Applied Polymer Science, 1999
- Effect of crystallinity on the mechanical properties of starch/synthetic polymer blendsJournal of Materials Science, 1997