Resistive Oxygen Sensor Using Ceria-Zirconia Sensor Material and Ceria-Yttria Temperature Compensating Material for Lean-Burn Engine
Open Access
- 5 November 2009
- Vol. 9 (11) , 8884-8895
Abstract
Temperature compensating materials were investigated for a resistive oxygen sensor using Ce0.9Zr0.1O2 as a sensor material for lean-burn engines. The temperature dependence of a temperature compensating material should be the same as the sensor material; therefore, the Y concentration in CeO2-Y2O3 was optimized. The resistance of Ce0.5Y0.5O2-δ was independent of the air-to-fuel ratio (oxygen partial pressure), so that it was confirmed to function as a temperature compensating material. Sensor elements comprised of Ce0.9Zr0.1O2 and Ce0.5Y0.5O2-δ were fabricated and the output was determined to be approximately independent of the temperature in the wide range from 773 to 1,073 K.Keywords
This publication has 27 references indexed in Scilit:
- Improvement in response of resistive oxygen sensor based on ceria–zirconia thick film with Pt catalyst on surfaceSensors and Actuators B: Chemical, 2009
- FeSrTiO3-based resistive oxygen sensors for application in diesel enginesSensors and Actuators B: Chemical, 2008
- Evaluation of response characteristics of resistive oxygen sensors based on porous cerium oxide thick film using pressure modulation methodSensors and Actuators B: Chemical, 2006
- Response kinetics of temperature-independent resistive oxygen sensor formulations: a comparative studySensors and Actuators B: Chemical, 2006
- Poisoning of Temperature Independent Resistive Oxygen Sensors by Sulfur DioxideJournal of Electroceramics, 2004
- Small temperature-dependent resistive oxygen gas sensors using Ce0.9Y0.1O2−δ as a new temperature compensating materialSensors and Actuators B: Chemical, 2004
- Fast response of resistive-type oxygen gas sensors based on nano-sized ceria powderSensors and Actuators B: Chemical, 2003
- Temperature-independent resistive oxygen exhaust gas sensor for lean-burn engines in thick-film technologySensors and Actuators B: Chemical, 2003
- Resistive oxygen gas sensors based on CeO2 fine powder prepared using mist pyrolysisSensors and Actuators B: Chemical, 2002
- Principles of solid state oxygen sensors for lean combustion gas controlElectrochimica Acta, 2001