Model and Numerical Simulation for the Second Penetration in Water-assisted Injection Molding
Authors:
- 1 November 2011
- journal article
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 26 (5) , 560-568
Abstract
Unlike gas-assisted injection molding, subsequent penetration occurs on the radial direction after water displacing polymer melt in cavity due to the incompressibility and fast cooling of water in water-assisted injection molding. To simulate this second penetration, a dimensionless method was employed to simplify the governing equations for melt flow. Based on the reduced model, a formula was derived via mathematical inference to calculate the second penetration velocity and distance. In order to catch the huge temperature gradient at water-polymer interface, both polymer and water thermal conduct problems were founded and coupled at the interface. The finite element method was employed to solve the melt flow problem, and the finite difference method was used to discretize the energy equation. To verify the validity of the proposed model and algorithm, experiments were performed to measure the displacement of the water–melt interface for various melt temperatures and water pressures. The experimental results indicate that the primary penetration theory is not accurately on predicting residual wall thickness, whereas the combined primary and second penetration method significantly improve the accuracy.Keywords
This publication has 12 references indexed in Scilit:
- Using differential mold temperatures to improve the residual wall thickness uniformity around curved sections of fluid assisted injection molded tubesInternational Communications in Heat and Mass Transfer, 2009
- Water assisted injection moulding: development of insights and predictive capabilities through experiments on instrumented process in parallel with computer simulationsPlastics, Rubber and Composites: Macromolecular Engineering, 2008
- Manufacture of Thermoplastic Elastomer Tubes by Water Assisted Injection Molding TechnologyRubber Chemistry and Technology, 2008
- Computing flow-induced stresses of injection molding based on the Phan–Thien–Tanner modelArchive of Applied Mechanics, 2007
- An experimental study of the water-assisted injection molding of glass fiber filled poly-butylene-terephthalate (PBT) compositesComposites Science and Technology, 2007
- The manufacturing of thermoplastic composite parts by water-assisted injection-molding technologyComposites Part A: Applied Science and Manufacturing, 2004
- Water‐assisted injection molding of thermoplastic materials: Effects of processing parametersPolymer Engineering & Science, 2003
- Gas-assisted non-newtonian fluid displacement in circular tubes and noncircular channelsChemical Engineering Science, 2001
- Perturbation method in gas-assisted power-law fluid displacement in a circular tube and a rectangular channelChemical Engineering Journal, 1999
- A unified simulation of the filling and postfilling stages in injection molding. Part I: FormulationPolymer Engineering & Science, 1991