Experimental Techniques and Rock Physics Modeling to Study the Effects of Mineral Content and Thermal Maturation on Elastic Properties of the Organic-Rich Shale: Case Study of the Longmaxi Formation
- 13 February 2025
- journal article
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (04) , 1884-1905
Abstract
Summary: To evaluate favorable fracturing locations and layers of shale gas reservoirs, it is essential to comprehend how thermal maturity and mineral composition affect geomechanical characteristics. The effects of kerogen thermal maturation on elastic properties of organic-rich shale under consideration of the vitrinite reflectance and how it relates to kerogen density and organic porosity demand in-depth investigation. We propose rock physics modeling of heterogeneous shale rock samples to model kerogen as a function of thermal maturity and elastic properties as a function of shale composition. Nine Longmaxi shale samples from different depths of Well A were collected and tested by using X-ray diffraction (XRD), light microscope, open system pyrolysis gas chromatography, nanoindentation, and uniaxial-triaxial compression techniques to examine mineralogy, geochemical, and geomechanical characteristics. Using the Voigt-Reuss-Hill average and differential effective medium approach, shale matrix was modeled first and incorporated kerogen matter in terms of incremental thermal maturation. The acoustic characteristics of Longmaxi laminated shale affected by the thermal maturation were also studied using the Hudson model. The results indicate that the Longmaxi shale is part of highly brittle hard rocks; more brittle minerals increase their strength. As clay minerals increase, we observe that at 10-MPa confining pressure, triaxial compression strength (TCS) decreases from 72 MPa to 43 MPa in the Longmaxi upper member sample (SUM), 63 MPa to 39 MPa in the Longmaxi middle member sample (SMM), and 55 MPa to 36 MPa in the Longmaxi lower member sample (SLM). However, with the rise of the quartz + carbonate + feldspar mineral group, we observe an increase in TCS, which goes from 58 MPa to 75 MPa in the SUM, 52 MPa to 68 MPa in the SMM, and 48 MPa to 66 MPa in the SLM. Research indicates that the effective modulus and P-wave velocity of Longmaxi shale falls with increasing of Ro from 0 to 3. In the SUM, Young’s modulus decreased from 11.4 GPa to 1.3 GPa. SMM shows a reduction of Young’s modulus from 11.1 GPa to 0.5 GPa, while SLM shows a decrease from 10.9 GPa to 1.14 GPa. Also, the Vp falls from 5.63 km/s to 4.2 km/s, while the Vs decreases from 3.4 km/s to 2.16 km/s in the SUM. However, in the SMM, Vp decreases from 5.58 km/s to 4.22 km/s, and Vs falls from 2.9 km/s to 1.7 km/s, while Vp and Vs are reduced in the SLM. The results of our modeling approach are confirmed by the variation of elastic properties measured in the laboratory and interpreted in well logs, which show a satisfying validity and usefulness. However, given the extreme variety of reservoir characteristics and basin evolution conditions, we also recommend that it be locally calibrated when applied to particular shale reservoirs.Keywords
This publication has 48 references indexed in Scilit:
- Pore structure variations across structural deformation of Silurian Longmaxi Shale: An example from the Chuandong Thrust-Fold BeltFuel, 2019
- Pore characterization of 3D-printed gypsum rocks: a comprehensive approachJournal of Materials Science, 2018
- Evaluation of CO2 injection in shale gas reservoirs with multi-component transport and geomechanical effectsApplied Energy, 2017
- Nanochemo-mechanical signature of organic-rich shales: a coupled indentation–EDX analysisActa Geotechnica, 2016
- Geomechanics of Gas Shales2015
- Optimizing nano-dynamic mechanical analysis for high-resolution, elastic modulus mapping in organic-rich shalesJournal of Materials Science, 2014
- Development of organic porosity in the Woodford Shale with increasing thermal maturityInternational Journal of Coal Geology, 2012
- Elastic properties of reinforced solids: Some theoretical principlesJournal of the Mechanics and Physics of Solids, 1963
- Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle .ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1929
- Bestimmung der Elastizitätskonstanten von EisenglanzAnnalen der Physik, 1907