Abstract
Porous lattice architectures are increasingly used in orthopaedic and biomedical implants to mitigate stiffness mismatch and facilitate bone ingrowth. The present study investigates the effect of porosity and aspect ratio (defined as the strut length-to-diameter ratio) on the stiffness and volumetric deformation of elongated dodecahedron (ED) unit cells. Among the wide range of topologies enabled by additive manufacturing, the ED lattice offers an attractive balance of geometric simplicity and tunability in terms of porosity, strut thickness, and aspect ratio, while maintaining space-filling capability. However, its mechanical behaviour and the role of porosity, aspect ratio, and parent-material properties remain insufficiently characterised. This study presents a finite element evaluation of the elastic response of the ED unit cell across porosities from 10–90%, aspect ratios from 0.125–5, and six representative implant materials. The effective elastic modulus, bulk modulus, and directional Poisson’s ratios were extracted and benchmarked against analytical expressions, showing good agreement across the full porosity range. The results indicate that the normalised elastic modulus decreases from approximately 0.84 to 0.03 as porosity increases from 10% to 90%, demonstrating a strong geometry-driven stiffness reduction. Increasing aspect ratio (0.25–5) enhances stiffness, particularly at intermediate porosities (40–60%), due to a transition from bending- to stretch-dominated deformation. In contrast, the volumetric response is governed largely by the parent material’s Poisson’s ratio, with high Poisson’s ratio materials exhibiting significantly lower bulk stiffness. Directional Poisson’s ratios show strong anisotropy, with in-plane values exceeding classical bounds at high porosity, and out-of-plane values exceeding unity for aspect ratios greater than 1. In some cases, this leads to a transition to negative bulk modulus driven by geometric anisotropy. The findings clarify the coupled influence of porosity, aspect ratio, and material properties on the mechanical behaviour of ED lattices, and provide quantitative design guidance for additively manufactured scaffolds in orthopaedic and lightweight structural applications.

This publication has 54 references indexed in Scilit: