Biomass Pretreatment with the Szego Mill™ for Bioethanol and Biogas Production
Open Access
Abstract
Results from an investigation of the mechanical size reduction with the Szego Mill™ as a pretreatment method for lignocellulosic biomass are presented. Pretreatment is a highly expensive and energy-consuming step in lignocellulosic biomass processing. Therefore, it is vital to study and optimize different pretreatment methods to find a most efficient production process. The biomass was milled with the Szego Mill™ using three different approaches: dry milling, wet milling and for the first time nitrogen assisted wet milling was tested. Bioethanol and biogas production were studied, but also fibre analysis and SEM (scanning electron microscope) analysis were carried out to characterize the effect of different milling approaches. In addition, two different process flows were used to evaluate the efficiency of downstream processing steps. The results show that pretreatment of barely straw with the Szego Mill™ enabled obtaining glucose concentrations of up to 7 g L−1 in the hydrolysis mixture, which yields at hydrolysis efficiency of 18%. The final ethanol concentrations from 3.4 to 6.7 g L−1 were obtained. The lowest glucose and ethanol concentrations were measured when the biomass was dry milled, the highest when nitrogen assisted wet milling was used. Milling also resulted in an 6–11% of increase in methane production rate during anaerobic digestion of straw.Keywords
Funding Information
- Doctoral School of Energy and Geotechnology III, supported by the European Union, European Regional Development Fund (ASTRA project “Value-chain based bio-economy”)
- the European Regional Development Fund via the Mobilitas Pluss of the Estonian Research Council (MOBERA2)
This publication has 22 references indexed in Scilit:
- Potentials and challenges in lignocellulosic biofuel production technologyRenewable and Sustainable Energy Reviews, 2019
- Mechanical pretreatment of lignocelluloses for enhanced biogas production: Methane yield prediction from biomass structural componentsBioresource Technology, 2019
- Recent advances in second generation bioethanol production: An insight to pretreatment, saccharification and fermentation processesRenewable and Sustainable Energy Reviews, 2017
- Insight into progress in pre-treatment of lignocellulosic biomassEnergy, 2017
- Ionic liquid pretreatment as emerging approaches for enhanced enzymatic hydrolysis of lignocellulosic biomassBiochemical Engineering Journal, 2016
- Combination of fungal and physicochemical processes for lignocellulosic biomass pretreatment – A reviewRenewable and Sustainable Energy Reviews, 2016
- Application of Steam Explosion as Pretreatment on Lignocellulosic Material: A ReviewIndustrial & Engineering Chemistry Research, 2015
- Environmentally friendly pretreatment of plant biomass by planetary and attrition millingBioresource Technology, 2013
- Production of bioethanol from lignocellulosic materials via the biochemical pathway: A reviewEnergy Conversion and Management, 2011
- Pretreatment technologies for an efficient bioethanol production process based on enzymatic hydrolysis: A reviewBioresource Technology, 2010