Mechanical Properties of Coated Plain Weave Fabrics under Biaxial Loads
Authors:
- Hisashi KumazawaHKHisashi Kumazawa
- Ippei SusukiISIppei Susuki
- Tomokazu MoritaTMTomokazu Morita
- Toshihiko KuwabaraTKToshihiko Kuwabara
Open Access
- 1 January 2004
- journal article
- Published by Japan Society for Aeronautical and Space Sciences in JOURNAL OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES
- Vol. 52 (608) , 402-407
Abstract
In this study, biaxial tensile tests of cruciform specimens with open hole were conducted for evaluating the strength of the coated plain weave fabrics composed of high specific tensile strength fibers. In addition to the biaxial tensile tests, uniaxial tensile tests of strip specimens were also carried out to obtain uniaxial fundamental properties of the fabrics. As the results of the biaxial and uniaxial tensile tests, open hole tensile strength of the fabric under biaxial loadings is approximately equal to the strength under uniaxial load irrespective of biaxial load ratio, and warp directional strip specimens exhibit higher strength than that of weft directional specimens in spite of the same densities of yarns in both directions. Experimental results exhibit that misalignment of weft yarns of the membrane partly contributes the loss of the strength in weft direction. The results of observations by microscope and tensile tests of single yarns reveal that the difference of the strength in warp and weft directions is caused by the degradation of weft yarns by heating process of polymer film coating on the fabrics in addition to the misalignment of yarns.Keywords
This publication has 12 references indexed in Scilit:
- Development of High Specific Strength Envelope Materials2003
- Measurement and analysis of yield locus and work hardening characteristics of steel sheets wtih different r-valuesActa Materialia, 2002
- Theory of Elasticity for Plain-Weave Fabrics. 2nd Report. Finite Element Formulation.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2002
- Numerical and experimental stiffness characterisations applied to soft textile composites for tensile structuresMaterials and Structures, 1998
- Crack-Tear-Strength Property of Coated Plain-Weave FabricsJournal of the Society of Materials Science, Japan, 1992
- Finite Biaxial Extension of Completely Set Plain Woven FabricsJournal of Applied Mechanics, 1979
- 3—THE FINITE-DEFORMATION THEORY OF PLAIN-WEAVE FABRICS PART I: THE BIAXIAL-DEFORMATION THEORYThe Journal of the Textile Institute, 1973
- Experimental study of the subsequent yield surface by using cross-shaped specimensJournal of the Mechanics and Physics of Solids, 1968
- 49—A GENERAL MODEL OF A FABRIC AS A GEOMETRIC-MECHANICAL STRUCTUREJournal of the Textile Institute Transactions, 1964
- 5—THE GEOMETRY OF CLOTH STRUCTUREJournal of the Textile Institute Transactions, 1937