Large three-dimensional poly(glycerol sebacate)-based scaffolds – a freeze-drying preparation approach
Authors:
- 23 October 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 1 (48) , 6650-6661
Abstract
Large three-dimensional poly(glycerol sebacate) (PGS)-based scaffolds were successfully fabricated via a freeze-drying and a subsequent curing process, in the presence of a minor structure-supporting polymer such as biocompatible poly(L-lactic acid) (PLLA). The resulting PGS/PLLA scaffolds exhibited highly interconnected open-cell structures. The presence of solid PLLA prevented the low-viscosity pre-polymer of PGS from enclosing open cells during the curing stage, thereby avoiding structural collapse of the scaffold. The ratio of PGS to PLLA affected the cell structure and mechanical properties, with a higher ratio of PGS offering a softer and more ductile scaffold in general. The PGS/PLLA scaffold containing 75 wt% PGS presented a porosity of 85%, an average pore size of 93 μm, a Young's modulus of 0.36 MPa, a tensile strength of 0.03 MPa, an elongation at yield of 13%, and good scaffold structure retention during in vitro degradation tests with weight losses of 40% and 9% respectively in 31 days with and without the presence of lipase enzyme. This novel versatile approach will allow for easy fabrication of large, optimal, interconnected porous PGS-based scaffolds for soft tissue engineering.Keywords
This publication has 61 references indexed in Scilit:
- Synthesis, properties and biomedical applications of poly(glycerol sebacate) (PGS): A reviewProgress in Polymer Science, 2012
- A comparison of the influence of material on in vitro cartilage tissue engineering with PCL, PGS, and POC 3D scaffold architecture seeded with chondrocytesBiomaterials, 2010
- An elastomeric patch derived from poly(glycerol sebacate) for delivery of embryonic stem cells to the heartBiomaterials, 2010
- Tailoring the mechanical properties of 3D‐designed poly(glycerol sebacate) scaffolds for cartilage applicationsJournal of Biomedical Materials Research Part A, 2010
- Accordion-like honeycombs for tissue engineering of cardiac anisotropyNature Materials, 2008
- Cardiac tissue engineering using perfusion bioreactor systemsNature Protocols, 2008
- Characterisation of a soft elastomer poly(glycerol sebacate) designed to match the mechanical properties of myocardial tissueBiomaterials, 2008
- Pre‐treatment of synthetic elastomeric scaffolds by cardiac fibroblasts improves engineered heart tissueJournal of Biomedical Materials Research Part A, 2007
- Biocompatibility analysis of poly(glycerol sebacate) as a nerve guide materialBiomaterials, 2005
- A tough biodegradable elastomerNature Biotechnology, 2002