Residual stress delaying phase transformation in Y-TZP bio-restorations
- 1 January 2012
- journal article
- research article
- Published by Taylor & Francis in Phase Transitions
- Vol. 85 (1-2) , 169-178
Abstract
Engineering favorable residual stress for the complex geometry of bi-layer porcelain-zirconia crowns potentially prevents crack initiation and improves the mechanical performance and lifetime of the dental restoration. In addition to external load, the stress field depends on initial residual stress before loading. Residual stress is the result of factors such as the thermal expansion mismatch of layers and compliance anisotropy of zirconia grains in the process of sintering and cooling. Stress induced phase transformation in zirconia extensively relaxes the residual stress and changes the stress state. The objective of this study is to investigate the coupling between tetragonal to monoclinic phase transformations and residual stress. Residual stress, on the surface of the sectioned single load to failure crown, at 23 points starting from the pure tetragonal and ending at a fully monoclinic region were measured using the micro X-ray diffraction sin2 ψ method. An important observation is the significant range in measured residual stress from a compressive stress of −400 MPa up to tensile stress of 400 MPa and up to 100% tetragonal to monoclinic phase transformation.Keywords
This publication has 15 references indexed in Scilit:
- Modified Y-TZP Core Design Improves All-ceramic Crown ReliabilityJournal of Dental Research, 2010
- Graded Zirconia Glass for Resistance to Veneer FractureJournal of Dental Research, 2010
- Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial denturesActa Biomaterialia, 2009
- Analyses of layer-thickness effects in bilayered dental ceramics subjected to thermal stresses and ring-on-ring testsDental Materials, 2008
- Efficient 3D finite element analysis of dental restorative procedures using micro-CT dataDental Materials, 2007
- Influence of thermal expansion mismatch and fatigue loading on phase changes in porcelain veneered Y‐TZP zirconia discsJournal of Oral Rehabilitation, 2007
- Zirconia‐implant‐supported all‐ceramic crowns withstand long‐term load: a pilot investigationClinical Oral Implants Research, 2006
- Shrinkage‐Free, Alumina–Glass Dental Composites via Aluminum OxidationJournal of the American Ceramic Society, 1997
- Influence of Tempering Method on Residual Stress in Dental PorcelainJournal of Dental Research, 1992
- Thermal expansion of dental alloys and porcelainsJournal of Biomedical Materials Research, 1980