Crack Detection of FRP-Reinforced Concrete Beam Using Embedded Piezoceramic Smart Aggregates
Open Access
Abstract
In this paper, the authors present a stress wave-based active sensing method to detect the crack in FRP-reinforced concrete beams. The embedded smart aggregates (SAs), which utilize Lead Zirconate Titanate (PZT) as transducers, are employed in this research to generate and sense the stress wave. Three specimens are involved in the experimental program and each is made of concrete, longitudinal distributed reinforcement, steel stirrups, main bar (FRP bar or steel bar), and four SAs. A pair of SAs installed on the lower part of the main bar and the other pair of SAs mounted on the upper part of main bar are utilized to monitor the crack occurrence and development in the three test specimens. The signals received by the SA sensors are analyzed in both time domain and frequency domain. The wavelet packet energy is used to extract damage features. The applied load–vertical displacement curves of mid-span in the specimen are obtained. Experimental results show the test specimens experience crushing failure when the concrete compression exceeds its compressive strength. Increasing the contact area between FRP bar and concrete can effectively improve the cracking load of the FRP-reinforced concrete beam and reduce the cracking speed and depth of FRP-reinforced concrete beam; on the other hand, increasing the elastic modulus of the main bar can slow down the crack development of concrete on the upper side of the main bar and decrease the displacement of reinforced concrete beam during the loading test process. The research results show that the developed piezoceramic-based active sensing method, though low-cost, can monitor the crack-induced damage and estimate the process of damage degree in real-time, and has potentials to provide an early warning of crack occurrence and development for FRP-reinforced concrete beams.Keywords
Funding Information
- National Nature Science Foundation of China (51778068,51678069)
- Major State Basic Research Development Program of China (2015CB057704, 2015CB057705)
- Scientific Research Fund of Hunan Provincial Education Department of China (17A010)
- Major Technological Achievements Transformation Program of Hunan Strategic emerging industries of China (2017GK4034)
- Hunan Nature Science Foundation of China (2019JJ40301)
- Double Top-class International Cooperation Scientific Research Fund of Changsha University of Science and Technology of China (2018IC18)
This publication has 66 references indexed in Scilit:
- Influence of cracks on chloride diffusivity in concrete: A five-phase mesoscale model approachConstruction and Building Materials, 2019
- Investigation of Bonding Behavior of FRP and Steel Bars in Self-Compacting Concrete Structures Using Acoustic Emission MethodSensors, 2019
- Feasibility Study of Steel Bar Corrosion Monitoring Using a Piezoceramic Transducer Enabled Time Reversal MethodApplied Sciences, 2018
- Investigation of the behaviour of SCC bridge deck slabs reinforced with BFRP bars under concentrated loadsEngineering Structures, 2018
- Deep Embedment (DE) FRP Shear Strengthening of Concrete Bridge Slabs under Loads Close to SupportsApplied Sciences, 2018
- Monitoring Concrete Deterioration Due to Reinforcement Corrosion by Integrating Acoustic Emission and FBG Strain MeasurementsSensors, 2017
- Effect of reinforcement ratio on the flexural performance of hybrid FRP reinforced concrete beamsComposites Part B: Engineering, 2017
- Experimental study on crack width and crack spacing for Glass-FRP reinforced concrete beamsEngineering Structures, 2017
- Acoustic emission monitoring and finite element analysis of debonding in fiber-reinforced polymer rebar reinforced concreteStructural Health Monitoring, 2016
- Cracking and deflections in GFRP RC beams: An experimental studyComposites Part B: Engineering, 2013