Droop-control-based state-of-charge balancing method for charging and discharging process in autonomous DC microgrids
- 1 June 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2359-2364
Abstract
In this paper, a droop control based state-of-charge (SoC) balancing method in autonomous DC microgrids is proposed. Both charging and discharging process have been considered. In particular, in the charging process, the droop coefficient is set to be proportional to SoC n , and in the discharging process, the droop coefficient is set to be inversely proportional to SoC n . Since the injected/output power is in inverse-proportion to the droop coefficient, with the proposed method, the energy storage unit (ESU) with higher SoC absorbs less power in the charging process and delivers more power in the discharging process. Meanwhile, the ESU with lower SoC absorbs more power in the charging process and delivers less power in the discharging process. Eventually, the SoC and injected/output power in each ESU are equalized. The exponent n for SoC is employed to regulate the balancing speed of the SoC and injected/output power. It is demonstrated that with higher exponent n, the balancing speed is higher. Simulation model comprised of three ESUs is implemented by using MATLAB/Simulink. The proposed method is verified by the simulation results.Keywords
This publication has 18 references indexed in Scilit:
- An Improved Droop Control Method for DC Microgrids Based on Low Bandwidth Communication With DC Bus Voltage Restoration and Enhanced Current Sharing AccuracyIEEE Transactions on Power Electronics, 2014
- State-of-Charge Balance Using Adaptive Droop Control for Distributed Energy Storage Systems in DC Microgrid ApplicationsIEEE Transactions on Industrial Electronics, 2013
- Hierarchical Control of Parallel AC-DC Converter Interfaces for Hybrid MicrogridsIEEE Transactions on Smart Grid, 2013
- Grid-Interface Bidirectional Converter for Residential DC Distribution Systems—Part One: High-Density Two-Stage TopologyIEEE Transactions on Power Electronics, 2013
- SoC-based dynamic power sharing method with AC-bus voltage restoration for microgrid applications2012
- Robust Droop Controller for Accurate Proportional Load Sharing Among Inverters Operated in ParallelIEEE Transactions on Industrial Electronics, 2011
- Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A SurveyIEEE Transactions on Industrial Electronics, 2006
- Modeling, analysis, and implementation of parallel multi-inverter systems with instantaneous average-current-sharing schemeIEEE Transactions on Power Electronics, 2003
- Modeling and dynamic analysis of paralleled DC/DC converters with master-slave current sharing control2002
- 3C strategy for inverters in parallel operation achieving an equal current distributionIEEE Transactions on Industrial Electronics, 2000