Nuclear analysis of structural damage and nuclear heating on enhanced K-DEMO divertor model
Authors:
- 12 October 2017
- journal article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 57 (12) , 126044
Abstract
This paper addresses nuclear analysis on the Korean fusion demonstration reactor (K-DEMO) divertor to estimate the overall trend of nuclear heating values and displacement damages. The K-DEMO divertor model was created and converted by the CAD (Pro-Engineer™) and Monte Carlo automatic modeling programs as a 22.5° sector of the tokamak. The Monte Carlo neutron photon transport and ADVANTG codes were used in this calculation with the FENDL-2.1 nuclear data library. The calculation results indicate that the highest values appeared on the upper outboard target (OT) area, which means the OT is exposed to the highest radiation conditions among the three plasma-facing parts (inboard, central and outboard) in the divertor. Especially, much lower nuclear heating values and displacement damages are indicated on the lower part of the OT area than others. These are important results contributing to thermal-hydraulic and thermo-mechanical analyses on the divertor and also it is expected that the copper alloy materials may be partially used as a heat sink only at the lower part of the OT instead of the reduced activation ferritic-martensitic steel due to copper alloy's high thermal conductivity.Keywords
This publication has 13 references indexed in Scilit:
- Comparison study on neutronic analysis of the K-DEMO water cooled ceramic breeder blanket using MCNP and ATTILAFusion Engineering and Design, 2016
- A Preliminary Development of the K-DEMO Divertor ConceptIEEE Transactions on Plasma Science, 2016
- Development of the Advanced Neutronic Analysis Model for the K-DEMO With MCNP CodeIEEE Transactions on Plasma Science, 2016
- Design concept of K-DEMO for near-term implementationNuclear Fusion, 2015
- Nuclear analysis of the ITER full-tungsten divertorFusion Engineering and Design, 2013
- A preliminary conceptual design study for Korean fusion DEMO reactorFusion Engineering and Design, 2013
- CAD-based interface programs for fusion neutron transport simulationFusion Engineering and Design, 2009
- An easy way to perform a radiation damage calculation in a complicated geometryFusion Engineering and Design, 2008
- Radiation Shielding Analyses for the ITER Upper Port ECRH LauncherFusion Science and Technology, 2008
- Test blanket modules in ITER: An overview on proposed designs and required DEMO-relevant materialsJournal of Nuclear Materials, 2007