Abstract
Titanium oxide (TiOx) thin films were fabricated by plasma-enhanced chemical vapor deposition using titanium tetraisopropoxide (TTIP) and cyclohexane (CHex) precursors. The films fabricated using a single precursor of TTIP at deposition temperatures of 400 degrees C and 500 degrees C showed polycrystalline structure with anatase and/or rutile phases. The TiOx films fabricated using mixed precursors of TTIP and CHex at temperatures in the range of 300-500 degrees C, and those fabricated using the single TTIP precursor at 300 degrees C showed amorphous structures. For the films fabricated using the single TTIP precursor, the O/Ti ratios were in the range of 1.72-1.75. Higher content of carbon (83-91 at%) and O/Ti ratios in the range of 1.31-1.83 were observed for the films fabricated using mixed precursors. Ti2p, O1s, and C1s peaks were analyzed using X-ray photoelectron spectroscopy. Fourier-transform infrared spectroscopy measurements showed that the Ti-O stretching vibration peak was primarily observed in the film fabricated using the single TTIP precursor; it had a lower intensity for the films fabricated using mixed precursors. Dry-etching showed that the TiOx film fabricated using the TTIP single precursor, deposited at 400 degrees C, had a NO etch selectivity of 9.9 over SiO2, which demonstrates its potential for application as a hard-mask material.