Experimental evaluation and modified Weibull characterization of the tensile behavior of tri-component elastic-conductive composite yarn
Authors:
- 28 March 2017
- journal article
- research article
- Published by SAGE Publications in Textile Research Journal
- Vol. 88 (10) , 1138-1149
Abstract
In order to clarify the effects of the extension rate and gauge length upon the distribution of tensile strength of tri-component elastic-conductive composite yarn (t-ECCY), experimental as well as theoretical studies have been performed in this paper. Influences of the extension rate and gauge length are highlighted. The yarn exhibits an extension-rate strengthening effect, and the higher extension rate results in a higher strength and fracture strain, irrespective of the gauge length considered, and vice versa. Expressed in terms of gauge length, yarn tenacity shows a drop for a longer testing length at all extension rates, based on the weakest-link theory. A modified two-parameter Weibull strength distribution model, taking into account the effects of extension rate and gauge length, can be reasonably used to quantify the degree of variability in tensile strength and to obtain the individual Weibull parameters for practical applications. Different fracture mechanisms of the t-ECCY are demonstrated at lower and higher extension rates. A “cascade-like” break happens at lower extension rates due to inner sliding, weaker interactive transverse force of individual fibers, and sufficient time available for the fiber realignment. Nevertheless, a “chimney-like” break dominates at higher extension rates by virtue of the reduced reorientation of some disordered fibers and intensive instant impact force of the stainless steel filament component along the load direction.Keywords
This publication has 25 references indexed in Scilit:
- A study on siro-, solo-, compact-, and conventional ring-spun yarns. Part II: yarn strength with relation to physical and structural properties of yarnsThe Journal of the Textile Institute, 2012
- Experimental investigations on tensile and pullout behaviour of woven coir geotextilesGeotextiles and Geomembranes, 2008
- Analysis of Spun Yarn Failure. Part I: Tensile Failure of Yarns as a Function of Structure and Testing ParametersTextile Research Journal, 2005
- Stress–strain characteristics of different spun yarns as a function of strain rate and gauge lengthThe Journal of the Textile Institute, 2005
- The Influence of the Strain Rate on the Characteristics of the Load—Elongation Curves of Ring-spun and Air-jet-spun YarnsThe Journal of the Textile Institute, 1999
- The effects of strain rate on the mechanical behaviour of kevlar fibre bundles: an experimental and theoretical studyComposites Part A: Applied Science and Manufacturing, 1998
- Mechanical Properties of Fabrics Woven from Yarns Produced by Different Spinning Technologies: Yarn Failure as a Function of Gauge LengthTextile Research Journal, 1991
- Weak-Link Effect on Tensile Properties of Cotton YarnsTextile Research Journal, 1990
- Influence of Extension Rate and Specimen Length on Tenacity and Breaking Extension of Acrylic / Viscose Rayon Rotor Spun YarnsTextile Research Journal, 1989
- Effect of Strain Rate on Yarn TenacityTextile Research Journal, 1985