Effect of Loading Mode on Strain Softening and Instability Behavior of Sand in Plane-Strain Tests
- 1 January 2009
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 135 (1) , 108-120
Abstract
Experimental data to study the effect of loading mode on the strain softening and instability behavior of sand under plane-strain conditions are presented in this paper. A new plane-strain apparatus was adopted to conduct consolidated drained and undrained tests under both deformation-controlled and load-controlled loading modes. The drained behavior of very loose and medium dense sand and the undrained behavior of very loose sand under plane-strain conditions were characterized. The test results show that the loading mode affects the postpeak behavior and controls whether strain softening or instability will occur in the postpeak region. Shear bands occurred in tests conducted on medium dense sand, but not in tests for very loose sand. The failure line and critical state line are not affected by the loading mode. The study also shows that the concept of a unique “ultimate state” for both dense and loose sand as previously established based on conventional drained triaxial tests is not supported by the plane-strain data.
Keywords
This publication has 37 references indexed in Scilit:
- Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetryInternational Journal for Numerical and Analytical Methods in Geomechanics, 2004
- Unstable behaviour of sand and its implication for slope instabilityCanadian Geotechnical Journal, 2003
- Liquefaction and Instability of a Granular Fill MaterialGeotechnical Testing Journal, 2000
- Shear bands in plane strain compression of loose sandGéotechnique, 1997
- Strain softening and shear band formation of sand in multi-axial testingGéotechnique, 1996
- Asymptotic behaviour of a granular soil in strain path testingGéotechnique, 1994
- The Measurement of K0 by Triaxial Strain Path TestingSoils and Foundations, 1991
- A Technique for Reducing Membrane Penetration and Bedding ErrorsGeotechnical Testing Journal, 1989
- Back analysis of the Nerlerk berm liquefaction slidesCanadian Geotechnical Journal, 1985
- Critical density of sandGéotechnique, 1981