Effect of Longitudinal-External-Fins on Fluid Flow Characteristics for Wing-Shaped Tubes Bundle in Crossflow
Open Access
- 5 November 2015
- journal article
- research article
- Published by Hindawi Limited in Journal of Thermodynamics
- Vol. 2015, 1-16
Abstract
A numerical study is conducted to clarify fluid-flow characteristics, pressure drop coefficient (), and the average skin friction coefficient () for wing-shaped-tubes bundle with longitudinal fins at downstream side of the tube using the commercial CFD FLUENT software package. The air-side ranges from 1800 to 9700. The tubes are employed with various fin heights () and fin thicknesses () such as 2 mm ≤ ≤ 12 mm and 1.5 mm ≤ ≤ 3.5 mm at the considered range. Results indicate that increases with for all . decreases with for all values for 1800 ≤ ≤ 4200 and then increases for 4200 ≤ ≤ 10000. Lowest values of , , and pumping power (PP) occurred at = 6 mm. Values of for = 6 mm are lower than those of NOF and = 2 mm by about 73 % and 32 %, respectively, at = 4000. decreases with . has negligible effect on . increases for 1.5 mm ≤ ≤ 2.5 mm while decreases with 2.5 mm < ≤ 3.5 mm for the considered range except for = 1850.
Keywords
This publication has 16 references indexed in Scilit:
- Interaction between mean flow and thermo-hydraulic behaviour in inclined louvered finsInternational Journal of Heat and Mass Transfer, 2011
- Global Hybrid Fuzzy Controller for a Flexible Single-Link ManipulatorJournal of Engineering and Applied Sciences, 2011
- Heat transfer and pressure drop correlations for compact heat exchangers with multi-region louver finsInternational Journal of Heat and Mass Transfer, 2010
- Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patternsExperimental Thermal and Fluid Science, 2009
- Estimation of heat transfer coefficient on the vertical plate fin of finned-tube heat exchangers for various air speeds and fin spacingsInternational Journal of Heat and Mass Transfer, 2007
- A numerical investigation of louvered fin-and-tube heat exchangers having circular and oval tube configurationsInternational Journal of Heat and Mass Transfer, 2001
- Heat transfer and friction characteristics of fin-and-tube heat exchangersInternational Journal of Heat and Mass Transfer, 2000
- Numerical and experimental studies of threedimensional plate-fin and tube heat exchangersInternational Journal of Heat and Mass Transfer, 1996
- Sensible heat and friction characteristics of plate fin-and-tube heat exchangers having plane finsInternational Journal of Refrigeration, 1996
- Longitudinally-finned cross-flow tube banks and their heat transfer and pressure drop characteristicsInternational Journal of Heat and Mass Transfer, 1985