Performance Assessment of Graphene Oxide–Reinforced Sustainable Geopolymer Concrete
Authors:
- 1 November 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 33 (11) , 04021322
Abstract
Geopolymers, known as the next generation binder, are gaining the interest of contemporary researchers due to their superior strength and durability properties compared with ordinary portland cement (OPC). The current investigation aims to develop a greener geopolymer concrete (GC) containing waste materials as a replacement to fine and coarse aggregates. Waste foundry sand (WFS), an industrial waste, has been used as partial replacement to normal sand, whereas natural coarse aggregates were partially to fully replaced by recycled concrete aggregates (RCA). In addition, indigenously synthesized graphene oxide (GO), in the laboratory, was added to GC by a small proportion of 0.05% by weight of binder to compensate for the performance loss in GC due to addition of waste materials. The strength and durability properties were studied up to 90 days of curing age. The microstructure was also studied by conducting scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR) to support the strength and durability results. The test results are promising and indicate enhanced performance of GC produced using waste materials with GO addition.Keywords
This publication has 54 references indexed in Scilit:
- Influence of iron making slags on strength and microstructure of fly ash geopolymerConstruction and Building Materials, 2013
- Technical and commercial progress in the adoption of geopolymer cementMinerals Engineering, 2012
- Utilization of waste foundry sand (WFS) in concrete manufacturingResources, Conservation and Recycling, 2011
- Graphene Oxide, Highly Reduced Graphene Oxide, and Graphene: Versatile Building Blocks for Carbon‐Based MaterialsSmall, 2010
- Effect of used-foundry sand on the mechanical properties of concreteConstruction and Building Materials, 2009
- Mid-infrared spectroscopic studies of alkali-activated fly ash structureMicroporous and Mesoporous Materials, 2005
- Effects of Moisture Availability on Corrosion Kinetics of Steel Embedded in ConcreteCorrosion, 1993
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991
- Leaching effects on silicate polymerization. An FTIR and silicon-29 NMR study of lead and zinc in portland cementEnvironmental Science & Technology, 1991
- Preparation of Graphitic OxideJournal of the American Chemical Society, 1958