Low-Ripple Continuous Control Set Model Predictive Torque Control for Switched Reluctance Machines Based on Equivalent Linear SRM Model
- 2 December 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (12) , 12480-12495
Abstract
In this article, a low-ripple continuous control set (CCS) model predictive torque control (MPTC) method for switched reluctance machines (SRMs) is proposed. The inherent high nonlinearity of the SRMs makes it difficult to solve the optimization problem in the CCS MPTC algorithm analytically. To address this issue, an equivalent linear SRM model is adopted, and the cost function is also properly modified. Then, with the torque boundary values provided by executing the voltage vectors of an improved switching table, the optimization problem in the CCS MPTC method becomes simple and analytically solvable. The Lagrange multiplier method is employed to solve this optimization problem analytically and generate the optimum torque reference values for the active phases. Based on the estimated torque variation rates, the duty cycles for each phase are calculated. Extensive simulation and experimental tests are carried out in a four-phase 8/6 SRM setup. These testing results reveal that the proposed CCS MPTC method shows much lower torque ripples and current ripples in a wide speed range with a low computational burden than the existing finite control set MPTC methods.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
This publication has 38 references indexed in Scilit:
- An Offline Torque Sharing Function for Torque Ripple Reduction in Switched Reluctance Motor DrivesIEEE Transactions on Energy Conversion, 2015
- An Extended-Speed Low-Ripple Torque Control of Switched Reluctance Motor DrivesIEEE Transactions on Power Electronics, 2014
- Minimization of Torque Ripple and Copper Losses in Switched Reluctance DriveIEEE Transactions on Power Electronics, 2011
- Optimization and Evaluation of Torque-Sharing Functions for Torque Ripple Minimization in Switched Reluctance Motor DrivesIEEE Transactions on Power Electronics, 2009
- Predictive PWM-based direct instantaneous torque control of switched reluctance drives2006
- High-Dynamic Four-Quadrant Switched Reluctance Drive Based on DITCIEEE Transactions on Industry Applications, 2005
- A new torque control method of a switched reluctance motor using a torque-sharing functionIEEE Transactions on Magnetics, 2002
- A SRM variable speed drive with torque ripple minimization control2002
- A new torque and flux control method for switched reluctance motor drivesIEEE Transactions on Power Electronics, 2002
- DITC-direct instantaneous torque control of switched reluctance drives2002