Development of Weather-Resistant 3D Printed Structures by Multi-Material Additive Manufacturing
Open Access
- 18 July 2020
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 4 (3) , 94
Abstract
Additive manufacturing, or 3D printing, has had a big impact on the manufacturing world through its low cost, material recyclability, and fabrication of intricate geometries with a high resolution. Three-dimensionally printed polymer structures in aerospace, marine, construction, and automotive industries are usually intended for service in outdoor environments. During long-term exposures to harsh environmental conditions, the mechanical properties of these structures can be degraded significantly. Developing coating systems for 3D printed parts that protect the structural surface against environmental effects and provide desired surface properties is crucial for the long-term integrity of these structures. In this study, a novel method was presented to create 3D printed structures coated with a weather-resistant material in a single manufacturing operation using multi-material additive manufacturing. One group of specimens was 3D printed from acrylonitrile-butadiene-styrene (ABS) material and the other group was printed from ABS and acrylic-styrene-acrylonitrile (ASA) as a substrate and coating material, respectively. The uncoated ABS specimens suffered significant degradation in the mechanical properties, particularly in the failure strain and toughness, during exposure to UV radiation, moisture, and high temperature. However, the ASA coating preserved the mechanical properties and structural integrity of ABS 3D printed structures in aggressive environments.Keywords
This publication has 30 references indexed in Scilit:
- A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part CharacteristicsJournal of Manufacturing and Materials Processing, 2019
- Additive manufacturing — A review of 4D printing and future applicationsAdditive Manufacturing, 2018
- A Review of 3D Printing Technology for Medical ApplicationsEngineering, 2018
- Additive manufacturing (3D printing): A review of materials, methods, applications and challengesComposites Part B: Engineering, 2018
- Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parametersApplied Surface Science, 2017
- A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS compositeIOP Conference Series: Materials Science and Engineering, 2016
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modelingComposites Part B: Engineering, 2015
- Making sense of 3-D printing: Creating a map of additive manufacturing products and servicesAdditive Manufacturing, 2014
- Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based MaterialsJournal of Failure Analysis and Prevention, 2014
- Anisotropic material properties of fused deposition modeling ABSRapid Prototyping Journal, 2002