Reduction Process of Pellet Containing High Chromic Vanadium–Titanium Magnetite in Cohesive Zone
Authors:
- 11 November 2014
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 86 (7) , 808-816
Abstract
In the present study, the reduction process of pellet containing high chromic vanadium–titanium magnetite in cohesive zone has been investigated. To elucidate the reduction process including the softening and melting properties, structure changes and migration processes of valuable components (Fe, V, Ti, and Cr) in pellet containing high chromic vanadium–titanium magnetite in cohesive zone, the experiment was carried out at different temperatures and the pellet samples were analyzed by the methods of XRD, SEM, and chemical analysis. The results of reduction process show that the temperature range of cohesive zone of pellet is from 1087.9 to 1338.3 °C and the maximum differential pressure of the burden is 15 859 Pa at the temperature of 1291 °C. The reduction process of pellet was gradually conducted from outside to inside, which could form a layer of iron shell on the outer surface of the pellet. A lot of wustite could be generated in the core of pellet when the reduction temperature exceeded 1100 °C. The migration process of iron is Fe2O3 → Fe3O4 → FeO → Fe, while the generated FeO could react with SiO2 forming 2FeO · SiO2. The reduction process of titanium is Fe2O3 · 3TiO2 → Fe5TiO8 → Fe2TiO4 → FeTiO3 → Ti(O0.19C0.53N0.32) → Ti(C,N) → [Ti] and MgO · TiO2 → Ti(C,N) → [Ti]. The migration process of vanadium is V2O3 → VN, VC → [V] and the chromium oxide was reduced as follows: (Fe0.6Cr0.4)2O3 → FeCr2O4 → [Cr].Keywords
This publication has 21 references indexed in Scilit:
- Carbothermic Reduction of Vanadium Titanomagnetite by Microwave Irradiation and Smelting BehaviorISIJ International, 2013
- Low Temperature Reduction Degradation Characteristics of Sinter, Pellet and Lump OreJournal of Iron and Steel Research International, 2011
- High-Temperature Oxidation Behavior of Vanadium, Titanium-Bearing Magnetite PelletJournal of Iron and Steel Research International, 2011
- Analysis of Vanadium-Bearing Titanomagnetite Sintering Process by Dissection of Sintering BedJournal of Iron and Steel Research International, 2011
- Progress in Technologies of Vanadium‐Bearing Titanomagnetite Smelting in PanGangSteel Research International, 2011
- Preparation of TiCl4 with the Titanium Slag Containing Magnesia and Calcia in a Combined Fluidized BedChinese Journal of Chemical Engineering, 2006
- Thermodynamics of Oxygen in Liquid Fe-Cr Alloy Saturated with FeO Cr2O3 Solid Solution.ISIJ International, 2002
- Softening and Melting Characteristics of Self-fluxed Pellets with and without the Addition of BOF-slag to the Pellet Bed.ISIJ International, 2000
- Effect of Reduction Rate on the Swelling Behaviour of Iron Ore Pellets.ISIJ International, 1992
- Sintering Properties of Iron Ore Mixes Containing Titanium.ISIJ International, 1992