Deceleration of silicon etch rate at high aspect ratios
Author:
- 1 July 2000
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 18 (4) , 1385-1389
Abstract
The molecular-flow conductance of a high aspect ratio feature can limit the etching species arriving at the bottom of the feature and thus limit the etch rate. A simple conductance model can predict the etch rate of the time-domain multiplexed etch process with good results at moderate-aspect ratios (5–20) for trenches, but at very high aspect ratios (>20) the conductance model breaks down. Other mechanisms are needed to explain the deceleration of etch rate and almost complete etch stop. In this article the reasons for etch stop at the bottom of deep features are discussed. Measurement results of deep silicon etching are presented. Very deep holes and trenches were etched into silicon to study the effect of process parameters. At moderate aspect ratios the bottom of the hole is nearly flat and the sidewalls are vertical. At high aspect ratio the sidewalls start to bow and the feature bottom turns into a sharp spearhead. The shape of the feature can have an impact on the step coverage of the passivation layer deposition during the passivation step and on passivation removal during the etch step, leading to excessive sidewall etching and reduced etch rate at the feature bottom. The nonzero sidewall reaction probability and flow conductance of tapered tubes were studied by Monte Carlo simulation. The main reason for deceleration of etching seems to be the loss of etchant species due to sidewall reactions combined with feature closure by ion-limited passivation polymer etching.Keywords
This publication has 11 references indexed in Scilit:
- Pattern shape effects and artefacts in deep silicon etchingJournal of Vacuum Science & Technology A, 1999
- Influence of Coil Power on the Etching Characteristics in a High Density Plasma EtcherJournal of the Electrochemical Society, 1999
- Characterization of a Time Multiplexed Inductively Coupled Plasma EtcherJournal of the Electrochemical Society, 1999
- Deep Silicon Etching in Inductively Coupled Plasma Reactor for MEMSPhysica Scripta, 1999
- The Benefits of Process Parameter Ramping During The Plasma Etching of High Aspect Ratio Silicon StructuresMRS Proceedings, 1998
- Advanced silicon etching using high-density plasmas1995
- Influence of reactant transport on fluorine reactive ion etching of deep trenches in siliconJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1993
- Phenomenological modeling of ion-enhanced surface kinetics in fluorine-based plasma etchingJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1993
- Microscopic uniformity in plasma etchingJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1992
- Conductance considerations in the reactive ion etching of high aspect ratio featuresApplied Physics Letters, 1989