Microstructure and Texture Evolution in Low Carbon and Low Alloy Steel during Warm Deformation
Open Access
Abstract
Warm compression tests were carried out on low carbon and low alloy steel at temperatures of 600–850 °C and stain rates of 0.01–10 s−1. The evolution of microstructure and texture was studied using a scanning electron microscope and electron backscattered diffraction. The results indicated that cementite spheroidization occurred and greatly reduced at 750 °C due to a phase transformation. Dynamic recrystallization led to a transition from {112} texture to {111} texture. Below 800 °C, the intensity and variation of texture with deformation temperature is more significant than that above 800 °C. The contents of the {111} texture and {111} texture were equivalent above 800 °C, resulting in the better uniformity of γ-fiber texture. Nucleation of //ND-oriented grains increased, leading to the strengthening of //ND texture. Microstructure analysis revealed that the uniform and refined grains can be obtained after deformation at 800 °C and 850 °C. The texture variation reflected the fact that 800 °C was the critical value for temperature sensitivity of warm deformation. At a large strain rate, the lowest dislocation density appeared after deformation at 800 °C. Therefore, 800 °C is a suitable temperature for the warm forming application, where the investigated material is easy to deform and evolves into a uniform and refined microstructure.Keywords
Funding Information
- National Natural Science Foundation of China (51975301)
- Public Welfare Technology Application Research Project of Zhejiang Province of China (LGG20E050001)
This publication has 41 references indexed in Scilit:
- Warm Deformation Microstructure of a Plain Carbon SteelJournal of Iron and Steel Research International, 2011
- Effect of Shear Strain on the Microstructural Evolution of a Low Carbon Steel during Warm DeformationMATERIALS TRANSACTIONS, 2010
- Warm deformation behavior of quenched medium carbon steel and its effect on microstructure and mechanical propertiesMaterials Science and Engineering: A, 2009
- Effect of Strain on Microstructural Evolution under Warm Deformation in an Ultra-Low Carbon SteelMATERIALS TRANSACTIONS, 2009
- EBSD study on the formation of fine ferrite grains in plain carbon steel during warm deformationMaterials Letters, 2007
- Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steelMaterials Science and Engineering: A, 2006
- Preferential Growth of Cube-Oriented Grains in Partially Annealed and Additionally Rolled Aluminum Foils for CapacitorsMATERIALS TRANSACTIONS, 2004
- Formation of ultrafine grained ferrite in low carbon steel by heavy deformation in ferrite or dual phase regionJournal of Materials Processing Technology, 2003
- Warm deformation of carbon steelJournal of Materials Processing Technology, 2000
- Origin of the Recrystallization Texture Formation in an Interstitial Free Steel.ISIJ International, 1996