Friction Stir Weldability at High Welding Speed of Two Structural High Pressure Die Casting Aluminum Alloys
Open Access
- 12 December 2022
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 6 (6) , 160
Abstract
In this work, the friction stir weldability of two structural high-pressure die casting aluminum alloys designed to manufacture thin-walled automotive components is investigated and compared. AlSi10MnMg and AlMg4Fe2 alloys were friction stir welded at a high welding speed (from 500 to 2000 mm/min) for a fixed rotation speed of 1500 RPM. The investigation was performed by studying the material flow influence on defect formation and microstructure, the mechanical properties of the welds and the forces that act during the friction stir welding process. The AlSi10MnMg alloy shows a lower incidence of defects than the AlMg4Fe2 alloy at all welding speeds investigated. Both materials present a great friction stir welding performance at 500 mm/min with a high joint efficiency in terms of ultimate tensile strength: 92% in AlSi10MnMg alloy and 99% in AlMg4Fe2 alloy.Keywords
Funding Information
- Eusko Jaurlaritza (KK-2021/00120)
This publication has 52 references indexed in Scilit:
- Force generation during friction stir welding of AA2024-T3CIRP Annals, 2012
- Evaluation of microstructure and wear behavior of friction stir processed cast aluminum alloyMaterials Characterization, 2012
- The use of neural network and discrete Fourier transform for real-time evaluation of friction stir weldingApplied Soft Computing, 2011
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented toolJournal of Materials Processing Technology, 2008
- A flow-partitioned deformation zone model for defect formation during friction stir weldingScripta Materialia, 2008
- Effect of welding parameters on microstructure in the stir zone of FSW joints of aluminum die casting alloyMaterials Letters, 2006
- Flow patterns during friction stir weldingMaterials Characterization, 2002
- Die erosion and its effect on soldering formation in high pressure die casting of aluminium alloysMaterials & Design (1980-2015), 1999
- Friction stir welding for the transportation industriesMaterials & Design (1980-2015), 1997