Sequences of fracture toughness micromechanisms in PP/CaCO3 nanocomposites
Authors:
- 23 September 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 110 (6) , 4040-4048
Abstract
Mechanical properties and fracture toughness micromechanisms of copolypropylene filled with different amount of nanometric CaCO3 (5–15 wt %) were studied. J‐integral fracture toughness was incorporated to measure the effect of incorporation of nanoparticle into PP matrix. Crack‐tip damage zones and fracture surfaces were studied to investigate the effect of nanofiller content on fracture toughness micromechanisms. It was found that nanofiller acted as a nucleating agent and decreased the spherulite size of polypropylene significantly. J‐integral fracture toughness (Jc) of nanocomposites was improved dramatically. The Jc value increased up to approximately two times that of pure PP at 5 wt % of nano‐CaCO3. The fracture micromechanisms varied from rubber particles cavitation and shear yielding in pure PP to simultaneous existence of rubber particles cavitation, shear yielding, filler particles debonding, and crazing in PP/CaCO3 nanocomposites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008Keywords
This publication has 24 references indexed in Scilit:
- Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGAComposites Science and Technology, 2007
- Impact‐toughening mechanisms of calcium carbonate‐reinforced polypropylene nanocompositeJournal of Applied Polymer Science, 2006
- Influence of filler particles on deformation and fracture mechanism of isotactic polypropyleneJournal of Materials Processing Technology, 2004
- Dilatational shear bands in rubber-modified isotactic polypropyleneMaterials & Design (1980-2015), 2004
- The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylenePolymer, 2002
- Toughening of isotactic polypropylene with CaCO 3 particlesPolymer, 2002
- Polypropylene/calcium carbonate nanocompositesPolymer, 2002
- Fracture toughness of polypropylene copolymers: influence of interparticle distance and temperaturePolymer, 1998
- Effect of nucleation, filler anisotropy and orientation on the properties of PP compositesComposites, 1994
- Nucleation and crystallization of polypropylene by mineral fillers: relationship to impact strengthPolymer, 1992