Determination of crack surface displacements for cracks emanating from a circular hole using weight function method
Authors:
- 2 October 2012
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 36 (4) , 340-348
Abstract
Cracks emanating from a circular hole are of significant engineering importance, especially in aerospace industry. Accurate determination of key fracture mechanics parameters is essential for damage tolerance design and fatigue life predictions. The purpose of this paper is to provide an efficient and accurate closed‐form weight function approach to the calculation of crack surface displacements for radial crack(s) emanating from a circular hole in an infinite and finite‐width plate. Results were presented for two loading conditions: remote applied stress and uniform stress segment applied to crack surfaces, and extensively compared to recent studies using other methods in the literature. Both single and double radial cracks were considered, and also the effect of finite plate width on crack surface displacements has been investigated. A brief assessment was made on an engineering estimation of displacements based on a correction of stress intensity factor ratio. It has been demonstrated that the Wu‐Carlsson closed‐form weight functions are very efficient, accurate and easy‐to‐use for calculating crack surface displacements for arbitrary load conditions. The method will facilitate fatigue crack closure and other fracture mechanics analyses where accurate crack surface displacements are required.Keywords
This publication has 9 references indexed in Scilit:
- Application of a strip-yield model to predict crack growth under variable-amplitude and spectrum loading – Part 1: Compact specimensEngineering Fracture Mechanics, 2011
- Crack-surface displacements for cracks emanating from a circular hole under various loading conditionsFatigue & Fracture of Engineering Materials & Structures, 2010
- The Stress Analysis of Cracks Handbook, Third Edition2000
- DUGDALE MODEL SOLUTION FOR COMPACT SPECIMEN1988
- The generalised weight function method for crack problems with mixed boundary conditionsJournal of the Mechanics and Physics of Solids, 1983
- A Crack-Closure Model for Predicting Fatigue Crack Growth under Aircraft Spectrum Loading1981
- Analysis of Closure in Fatigue Crack GrowthJournal of Applied Mechanics, 1978
- Some remarks on elastic crack-tip stress fieldsInternational Journal of Solids and Structures, 1972
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960