Numerical and Experimental Investigation of Thermomechanical Deformation in High-Aspect-Ratio Electroplated Through-Silicon Vias
- 1 January 2008
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (12) , H981-H986
Abstract
In this paper we present the numerical and experimental analysis of thermomechanical deformation in high-aspect-ratio copper electroplated through-silicon vias (TSVs), which were fabricated by deep reactive ion etching, thermal oxidation, and bottom-up electroplating processes. Later, these TSVs were subjected to thermal cyclic loading of 25–125°C25–125°C . Due to the significant mismatch in the coefficients of thermal expansion of silicon and copper, thermomechanical stress was generated at the copper–silicon interface. Detailed investigation of this stress is of prime importance as it is one of the main root-causes behind the crack formation and dielectric delamination at the interface. A three-dimensional finite element model of the copper-filled TSVs was built and simulation was performed to predict the theoretical distribution of thermomechanical deformation. A noncontact digital image speckle correlation technique was used for the in situ measurement of the thermal deformation and the thermomechanical stress. Thermomechanical shear strain at the copper–silicon oxide–silicon interface was found to be the significant deformation mode in these TSVs.Keywords
This publication has 30 references indexed in Scilit:
- High Aspect Ratio Vertical Through-Vias for 3D MEMS Packaging Applications by Optimized Three-Step Deep RIEJournal of the Electrochemical Society, 2008
- Mechanical and microstructural characterization of high aspect ratio through-wafer electroplated copper interconnectsJournal of Micromechanics and Microengineering, 2007
- Aspect-Ratio-Dependent Copper Electrodeposition Technique for Very High Aspect-Ratio Through-Hole PlatingJournal of the Electrochemical Society, 2006
- Fabrication of High Aspect Ratio 35 μm Pitch Through-Wafer Copper Interconnects by Electroplating for 3-D Wafer StackingElectrochemical and Solid-State Letters, 2006
- In-Situ Micro-Digital Image Speckle Correlation Technique for Characterization of Materials' Properties and Verification of Numerical ModelsIEEE Transactions on Components and Packaging Technologies, 2004
- SOP: What Is It and Why? A New Microsystem-Integration Technology Paradigm-Moore's Law for System Integration of Miniaturized Convergent Systems of the Next DecadeIEEE Transactions on Advanced Packaging, 2004
- Ultrahigh Strength and High Electrical Conductivity in CopperScience, 2004
- High-Aspect-Ratio Copper Via Filling Used for Three-Dimensional Chip StackingJournal of the Electrochemical Society, 2003
- Through-wafer copper electroplating for three-dimensional interconnectsJournal of Micromechanics and Microengineering, 2002
- Mechanical measurement of the residual stress in thin PVD filmsThin Solid Films, 1995