Effects of Laser Annealing Parameters on Optical and Electrical Properties of ITO/Metallic Glass Alloy Bi-layer Films
Open Access
- 30 June 2015
- journal article
- research article
- Published by Springer Nature in Discover Nano
- Vol. 10 (1) , 274
Abstract
AgAlMg (AAM) films with three different atomic percentage compositions are prepared, namely, Ag12Al62Mg26 (denoted as A1AM), Ag22Al46Mg32 (denoted as A2AM), and Ag36Al25Mg39 (denoted as A3AM). In addition, the AAM films are deposited with four different thicknesses, i.e., 3, 6, 9, and 12 nm. The indium-tin oxide thickness is assigned a constant value of 30 nm in every case. The results show that the optical transmittance of the AAM/IAAM films improves (i.e., increases) with a reducing AAM film thickness, while the electrical resistivity improves (i.e., reduces) with an increasing film thickness. It is shown that the IA2AM film with an AMM thickness of 9 nm yields the optimal compromise between the optical transmittance and the electrical resistivity. The as-deposited IAAM films are found to have optical transmittance and electric resistivity values of 65 % and 90 Ω/□, respectively. The IA2AM films are annealed using a near-infrared laser at different pulse energies with a wavelength of 1064 nm and repetition rates ranging from 100 ~ 400 kHz. For both films, the optical and electrical properties are enhanced as the pulse energy increases to a certain critical value due to a transition from an amorphous microstructure to a crystalline structure. Given a repetition rate of 400 kHz and a pulse energy of 1.03 μJ, the optical transmittance and sheet resistance of the IAAM film are found to be 80 % and 15 Ω/□, respectively. The corresponding value of the Haacke figure of merit changed from 0.15 × 10−3 to 7.16 × 10−3 Ω−1 due to the optimal laser annealing conditions.Keywords
This publication has 33 references indexed in Scilit:
- Patterning electrode for cholesteric liquid crystal display by pulsed laser ablationOptics and Lasers in Engineering, 2010
- The cohesive crack and buckle delamination resistances of indium tin oxide (ITO) films on polymeric substrates with ductile metal interlayersSurface and Coatings Technology, 2010
- Low temperature remote plasma sputtering of indium tin oxide for flexible display applicationsThin Solid Films, 2009
- Low resistance and highly transparent ITO–Ag–ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cellsSolar Energy Materials and Solar Cells, 2009
- ITO/metal/ITO multilayer structures based on Ag and Cu metal films for high-performance transparent electrodesSolar Energy Materials and Solar Cells, 2008
- Growth and characterization of indium tin oxide thin films deposited on PET substratesThin Solid Films, 2008
- Comparison study of ITO thin films deposited by sputtering at room temperature onto polymer and glass substratesThin Solid Films, 2005
- ZnS/Ag/ZnS nano-multilayer films for transparent electrodes in flat display applicationApplied Surface Science, 2001
- ITO/Ag/ITO multilayer films for the application of a very low resistance transparent electrodeThin Solid Films, 1999
- Dependence of film composition and thicknesses on optical and electrical properties of ITO–metal–ITO multilayersThin Solid Films, 1998