Softening Damage Analysis of Gypsum Rock With Water Immersion Time Based on Laboratory Experiment
Open Access
- 2 September 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 125575-125585
Abstract
In view of the effect of water on the physical and mechanical parameters of natural gypsum rock, in this study, gypsum rock in the goaf of the gypsum mine in the Jiangsu Province was selected as the research object, and gypsum rock samples were prepared with different immersion times. In addition, uniaxially tests were performed separately on the gypsum rock samples. Compression and scanning electron microscopy experiments were carried out to analyze the effects of immersion time on the uniaxial compressive strength, elastic modulus, Poisson’s ratio, and microstructure of gypsum. The results show that the uniaxial compressive strength and elastic modulus of gypsum are inversely proportional to the water content. However, the Poisson’s ratio is direly proportional to the water content, and the failure mode is destroyed by the brittle fracture of a single crack and is transformed into the shear ductile failure of the Y-shaped crack. Microscopically, with increasing immersion time, the bonds in the crystal of the microporous cracks and microcrack tips are weakened by hydrolysis, and the macroscopic structure is complicated by the internal structure of gypsum, and the end of the crack is expanded by the compressive action of water. Based on the damage mechanics, the evolution equation of gypsum soaking softening damage based on time factor was derived. The relationship between the brittleness coefficient and softening damage variable is revealed, providing a theoretical basis for the determination of the softening degree of gypsum in the goaf.Keywords
Funding Information
- Key Research and Development Project of Zhejiang Province (2019C03104)
This publication has 14 references indexed in Scilit:
- Relating measured moisture of gypsum board to estimated water activity using moisture metersBuilding and Environment, 2019
- Attribute recognition model for risk assessment of water inrushBulletin of Engineering Geology and the Environment, 2017
- Influence of water content on the strength and deformability of gypsumInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Prediction of the strength and elasticity modulus of gypsum using multiple regression, ANN, and ANFIS modelsInternational Journal of Rock Mechanics and Mining Sciences, 2009
- The influence of relative humidity on the rate of convergence in an underground gypsum mineInternational Journal of Rock Mechanics and Mining Sciences, 2008
- Influence of water content on the strength of rockEngineering Geology, 2006
- The aging of gypsum in underground minesEngineering Geology, 2004
- Statistical Analysis of the Influence of Water Content on the Strength of the Miocene LimestoneRock Mechanics and Rock Engineering, 2004
- Sensitivity of sandstone strength and deformability to changes in moisture contentQuarterly Journal of Engineering Geology, 1992
- Evaluating the strength and deformability of sandstonesQuarterly Journal of Engineering Geology and Hydrogeology, 1991