Measurements and empirical model of the acoustic properties of reticulated vitreous carbon
- 31 January 2005
- journal article
- research article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 117 (2) , 536-544
Abstract
Reticulated vitreous carbon (RVC) is a highly porous, rigid, open cell carbon foam structure with a high melting point, good chemical inertness, and low bulk thermal conductivity. For the proper design of acoustic devices such as acoustic absorbers and thermoacoustic stacks and regenerators utilizing RVC, the acoustic properties of RVC must be known. From knowledge of the complex characteristic impedance and wave number most other acoustic properties can be computed. In this investigation, the four-microphone transfer matrix measurement method is used to measure the complex characteristic impedance and wave number for 60 to 300 pore-per-inch RVC foams with flow resistivities from 1759 to 10 782 Pa s m−2 in the frequency range of 330 Hz–2 kHz. The data are found to be poorly predicted by the fibrous material empirical model developed by Delany and Bazley, the open cell plastic foam empirical model developed by Qunli, or the Johnson–Allard microstructural model. A new empirical power law model is developed and is shown to provide good predictions of the acoustic properties over the frequency range of measurement. Uncertainty estimates for the constants of the model are also computed.Keywords
This publication has 26 references indexed in Scilit:
- Comparison of errors in the three- and four-microphone methods used in the measurement of the acoustic properties of porous materialsAcoustics Research Letters Online, 2002
- Dynamic measurements of the thermal dissipation function of reticulated vitreous carbonThe Journal of the Acoustical Society of America, 2001
- Measurements with reticulated vitreous carbon stacks in thermoacoustic prime movers and refrigeratorsThe Journal of the Acoustical Society of America, 1998
- Recent topics concerning the acoustics of fibrous and porous materialsApplied Acoustics, 1993
- New empirical equations for sound propagation in rigid frame fibrous materialsThe Journal of the Acoustical Society of America, 1992
- Propagation of sound and the assignment of shape factors in model porous materials having simple pore geometriesThe Journal of the Acoustical Society of America, 1992
- Standing wave apparatus for measuring fundamental properties of acoustic materials in airThe Journal of the Acoustical Society of America, 1990
- Propagation of sound in highly porous open-cell elastic foamsThe Journal of the Acoustical Society of America, 1983
- Theory of Propagation of Elastic Waves in a Fluid-Saturated Porous Solid. II. Higher Frequency RangeThe Journal of the Acoustical Society of America, 1956
- Theory of Propagation of Elastic Waves in a Fluid-Saturated Porous Solid. I. Low-Frequency RangeThe Journal of the Acoustical Society of America, 1956