Surface modification of UHMWPE fibers with chlorination and polydopamine for enhancing the mechanical properties of composites
Authors:
- 8 August 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (41)
Abstract
Ultra‐high molecular weight polyethylene (UHMWPE) fibers had many excellent mechanical properties, but their applications in composites were limited due to the weak interfacial adhesion between UHMWPE fibers with non‐polar methylene and resin matrix. This paper explored an efficient method for the damage‐free modification of fibers by chloride grafting followed by polydopamine (PDA) deposition to obtain UHMWPE‐Cl‐PDA fiber while maintaining the excellent mechanical properties of the fiber. The chemical components of surface treated fibers were observed by XPS and FTIR‐ATR, and the results proved that the fiber surface has been successfully chlorinated and then coated with PDA layer. The surface morphologies of fibers measured by SEM showed the rough surface of UHMWPE‐Cl‐PDA fibers was beneficed to anchor the resin matrix. The different mechanical properties of composites were studied, such as interfacial shear strength (IFSS), impact strength, flexural strength and modulus, especially the IFSS between UHMWPE‐Cl‐PDA and epoxy matrix and the impact strength of UHMWPE‐Cl‐PDA composite were increased by 29.1% and 53.8%, respectively, compared with UHMWPE fibers deposited by PDA.Keywords
Funding Information
- Priority Academic Program Development of Jiangsu Higher Education Institutions
This publication has 35 references indexed in Scilit:
- The effect of polypyrrole coatings on the adhesion and structure properties of UHMWPE fiberSynthetic Metals, 2011
- Dopamine−Melanin Film Deposition Depends on the Used Oxidant and Buffer SolutionLangmuir, 2011
- Continuous Plasma Treatment of Ultra‐High‐Molecular‐Weight Polyethylene (UHMWPE) Fibres for Adhesion ImprovementPlasma Processes and Polymers, 2009
- Synthesis and characterization of multiwalled carbon nanotube reinforced ultra high molecular weight polyethylene composite by electrostatic spraying techniqueComposites Part A: Applied Science and Manufacturing, 2007
- Mussel-Inspired Surface Chemistry for Multifunctional CoatingsScience, 2007
- Statistical dynamic tensile strength of UHMWPE-fibersPolymer, 2004
- Surface modification of ultrahigh‐molecular‐weight polyethylene fibersJournal of Polymer Science Part B: Polymer Physics, 2003
- The relationship between zeta‐potential and pull‐out shear strength on modified UHMWPE fiber reinforced epoxy compositesPolymer Composites, 1998
- Application of plasma technologies in fibre-reinforced polymer composites: a review of recent developmentsComposites Part A: Applied Science and Manufacturing, 1997
- Surface modification of ultrahigh molecular weight polyethylene fibers by plasma treatment. II. Mechanism of surface modificationJournal of Applied Polymer Science, 1993